[cisco-voip] connecting adtran atlas 550 with cisco cme routers

[Tanner Ezell]

Unfortunately I sold my Adtran before I could make a video of it's
configuration, however, if memory servers, you need to go to "Network", I
believe it is User Network, you specify a number+wild card mask, so say
555-555-1XXX, and then you select which port it goes out on.
I apologize for the half baked reply.

On Tue, Oct 13, 2009 at 10:49 AM, anand <anand.eee at gmail.com> wrote:

> Hi
> I have 3845 and 2851 routers with CME installed on them.I have adtran atlas
> 550 which i am planning to use as CO.On the routers i have quad fxo ports
> and vic2-2bri isdn s/t interface cards installed on them.
>
> On adtran i have octal fxs modules and quad isdn bri u interface cards.Can
> someone help me with configuration of adtran so that i can sucessfully make
> calls.
>
> Can i make calls with the equipment available for me.
>
> Pls help me with this
>
>
> thanks,
> andy
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>


-- 
Regards,
Tanner Ezell
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20091013/23137df1/attachment.html>