[cisco-voip] connecting adtran atlas 550 with cisco cme routers

[anand]

HI Tanner Ezell,

Thanks for the reply.Can i make calls between routers with the equipment i
mentioned earlier i mean interface cards on adran and routers.

thanks,
andy

On Tue, Oct 13, 2009 at 9:53 AM, Tanner Ezell <tanner.ezell at gmail.com>wrote:

> Unfortunately I sold my Adtran before I could make a video of it's
> configuration, however, if memory servers, you need to go to "Network", I
> believe it is User Network, you specify a number+wild card mask, so say
> 555-555-1XXX, and then you select which port it goes out on.
> I apologize for the half baked reply.
>
> On Tue, Oct 13, 2009 at 10:49 AM, anand <anand.eee at gmail.com> wrote:
>
>> Hi
>> I have 3845 and 2851 routers with CME installed on them.I have adtran
>> atlas 550 which i am planning to use as CO.On the routers i have quad fxo
>> ports and vic2-2bri isdn s/t interface cards installed on them.
>>
>> On adtran i have octal fxs modules and quad isdn bri u interface cards.Can
>> someone help me with configuration of adtran so that i can sucessfully make
>> calls.
>>
>> Can i make calls with the equipment available for me.
>>
>> Pls help me with this
>>
>>
>> thanks,
>> andy
>>
>> _______________________________________________
>> cisco-voip mailing list
>> cisco-voip at puck.nether.net
>> https://puck.nether.net/mailman/listinfo/cisco-voip
>>
>>
>
>
> --
> Regards,
> Tanner Ezell
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20091013/5ffd1efd/attachment.html>