[cisco-voip] mtp? Moh on VGW

[Scott Voll]

that fixed it.

thanks

I removed the MTP required and entered the MoH command and it works.

Thanks

Scott

On Wed, Oct 28, 2009 at 1:31 PM, Ryan Ratliff <rratliff at cisco.com> wrote:

> Actually MTPs don't support multicast so with the MTP you are using unicast
> MOH.
>
> Do you have the command 'ccm-manager music-on-hold' on the router?  I
> believe it is required for MMOH to work over H.323 since technically the
> protocol doesn't support multicast.
>
> -Ryan
>
> On Oct 28, 2009, at 4:24 PM, Scott Voll wrote:
>
> Multicast MoH
>
> you get nothing without the MTP required checked.  No tone, not music, not
> static....... Nothing.
>
> I seen a bug back on 12.1 code that said use the MTP required so I tried
> it.  that's the only thing I have found that will get the Multicast MoH to
> work
>
> Scott
>
> On Wed, Oct 28, 2009 at 1:09 PM, Ryan Ratliff <rratliff at cisco.com> wrote:
>
>> See below...
>>
>> On Wed, Oct 28, 2009 at 12:10 PM, Ryan Ratliff <rratliff at cisco.com>wrote:
>>
>>> Are you using multicast MOH, unicast?
>>>
>>> Can you define "doesn't work"?  Do you hear silence or get tone on hold?
>>>
>>> -Ryan
>>>
>>>
>>> On Oct 28, 2009, at 1:08 PM, Scott Voll wrote:
>>>
>>> I have a 2800 VGW H323 to Cm 7.1.3.
>>>
>>> Moh does not work unless I check the MTP required on the GW for PSTN
>>> callers.  why is that?
>>>
>>> IOS ver is 12.4.24t
>>>
>>> Thanks
>>>
>>> Scott
>>> _______________________________________________
>>> cisco-voip mailing list
>>> cisco-voip at puck.nether.net
>>> https://puck.nether.net/mailman/listinfo/cisco-voip
>>>
>>>
>>
>>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20091028/64b79863/attachment.html>