[cisco-voip] PSAP sees Billing Telephone Number, not DID associated with phone

[Lund, John C.]

Hi,

We purchased a PRI (Cisco 2851 Gateway) from ATT, and while testing I find out the PSAP only sees the BTN when I make a test 911 call.  I called the ATT trouble line and they told me they never block the calling number and that it is configurable on each PBX.

Are they correct and is it a setting I can change to allow the PSAP to see individual DIDs?

CUCM 7.02
2851 MGCP
NM-4VWIC-MBRB / VWIC2-1MFT-T1E1-T1



Thanks,

John


-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20091030/626c9802/attachment.html>