[cisco-voip] CFwd unregistered for hunt pilot

[Lelio Fulgenzi]

It looks like forward unregistered is only available in 7.x and above. But the forward no coverage is supposed to help with hunt groups. So if you change the forward no coverage to Unity for each member, then the ring no answer and ring busy of the hunt pilot to where you want it to go when no phones are registered, that might help. 

I'm just thinking out loud here. You might have to play with the settings a bit. 

--- 
Lelio Fulgenzi, B.A. 
Senior Analyst (CCS) * University of Guelph * Guelph, Ontario N1G 2W1 
(519) 824-4120 x56354 (519) 767-1060 FAX (JNHN) 
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ 
"Bad grammar makes me [sic]" - Tshirt 


----- Original Message ----- 
From: "Mike Norton" <mikenorton at pwsd76.ab.ca> 
To: "Lelio Fulgenzi" <lelio at uoguelph.ca> 
Cc: cisco-voip at puck.nether.net 
Sent: Tuesday, September 1, 2009 7:04:03 PM GMT -05:00 US/Canada Eastern 
Subject: RE: [cisco-voip] CFwd unregistered for hunt pilot 




No. I have the forward-no-answer and forward-busy set to go to Unity. What I need is to forward to a different number, not Unity, when all the hunt members are unregistered. 




-- 

Mike Norton 

I.T. Support 

Peace Wapiti School Division No. 76 

Helpdesk: 780-831-3080 

Direct: 780-831-3076 





From: Lelio Fulgenzi [mailto:lelio at uoguelph.ca] 
Sent: September-01-09 4:58 PM 
To: Norton, Mike 
Cc: cisco-voip at puck.nether.net 
Subject: Re: [cisco-voip] CFwd unregistered for hunt pilot 




Hunt Pilots (in v4.x) have forward ring no answer and forward busy options. Does this not help? 

--- 
Lelio Fulgenzi, B.A. 
Senior Analyst (CCS) * University of Guelph * Guelph, Ontario N1G 2W1 
(519) 824-4120 x56354 (519) 767-1060 FAX (JNHN) 
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ 
"Bad grammar makes me [sic]" - Tshirt 


----- Original Message ----- 
From: "Mike Norton" <mikenorton at pwsd76.ab.ca> 
To: cisco-voip at puck.nether.net 
Sent: Tuesday, September 1, 2009 6:24:05 PM GMT -05:00 US/Canada Eastern 
Subject: [cisco-voip] CFwd unregistered for hunt pilot 




I need behaviour similar to “Forward Unregistered” on a phone’s DN, but I need it on a hunt pilot. Looking for suggestions on how I might be able to accomplish that. This is on CUCM 6.1.3. 



I have a hunt pilot, and it has a broadcast line group with some phones, all of which are located at a remote site. The line group is set to timeout after 30 seconds; at that point, the hunt pilot goes to voicemail. What I want is that if the remote phones are all unregistered (e.g. during a WAN outage), then instead of going to voicemail, send the call to a PSTN number where the site’s SRST can pick it up. 



Any suggestions? I think the key might be with the Hunt Options on the line group, but I’m not sure. They way they are worded, the choices that are available there don’t really seem all that geared towards groups that are broadcast. 



-- 

Mike Norton 

I.T. Support 

Peace Wapiti School Division No. 76 

Helpdesk: 780-831-3080 

Direct: 780-831-3076 




_______________________________________________ cisco-voip mailing list cisco-voip at puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-voip
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20090901/fef863df/attachment.html>