[cisco-voip] CUCM7 discard digits only for call forwarding

[Matthew Loraditch]

If you use Mobility/Single Number Reach vs CfwdAll you can do translations and transformations via the Rerouting Calling Search Space.


Matthew Loraditch
1965 Greenspring Drive
Timonium, MD 21093 
support at heliontechnologies.com
(p) (410) 252-8830
(F) (443) 541-1593

Visit us at www.heliontechnologies.com 
Support Issue? Email support at heliontechnologies.com for fast assistance!


-----Original Message-----
From: cisco-voip-bounces at puck.nether.net [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of douzer
Sent: Wednesday, September 02, 2009 4:07 PM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] CUCM7 discard digits only for call forwarding

Hello,

I have to find a way, that when someone activates call forwarding on his
DN and someone else calls this phone number, the call gets redirected to
his mobile phone including the phone number of the originate calling party.

The problem is, that I get the calls from the PSTN with leading zeros
like 0041, 0049 etc. The CUCM redirects everything alright but sends
this numbers as calling party numbers.
The phone company told me, that I have to discard this leading zeros, so
that they can send the original calling party number to the redirected
phone number.

I didn't find a way, how I can place a calling party transformation
pattern (for example 0+.!) to manipulate the calling party numbers, just
for call forwarding.

Can someone tell me, where I have to place the calling party
transformation pattern, to discard the zeros?


Consecutively the equipment we're using:

CUCM 7.0.1 business edition
Cisco 2851 as mgcp gateway
Cisco 7945 or 7911 phones


Best regards
_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip