[cisco-voip] Unity Connection 7.1.2 Template for Importing Users the Caller Input set to transfer to main number

[lelio at uoguelph.ca]

Bug in 7.1(2)

Supposed to be fixed in 7.1(3)

Lelio Fulgenzi, Senior Analyst
Computing & Communications
University of Guelph
519-824-4120 x56354

...sent from my iPod - please pardon my fat fingers ;)

[XKJ2000]

On 2009-09-02, at 10:51 PM, "Jason Aarons (US)" <jason.aarons at us.didata.com 
 > wrote:

> I’ve setup a User Template for Importing Users in Unity Connection.  
>  I’ve setup a Caller Input for 0 to transfter to main number.
>
>
>
> However I noticed that when I import User the Template isn’t setting 
>  that Caller Input. I have to go behind and manually touch each user 
>  to set the zero out.
>
>
>
> Bug I presume, checking Bug Toolkit.
>
>
>
> Disclaimer: This e-mail communication and any attachments may  
> contain confidential and privileged information and is for use by  
> the designated addressee(s) named above only. If you are not the  
> intended addressee, you are hereby notified that you have received  
> this communication in error and that any use or reproduction of this  
> email or its contents is strictly prohibited and may be unlawful. If  
> you have received this communication in error, please notify us  
> immediately by replying to this message and deleting it from your  
> computer. Thank you.
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20090902/bdb43b3f/attachment.html>