[cisco-voip] Fixed Audio

[Matthew Loraditch]

You need to get the USB MOH Adapter Cisco Part: MOH-USB-AUDIO

Plug it into the server and go.

Matthew Loraditch
1965 Greenspring Drive
Timonium, MD 21093
support at heliontechnologies.com<mailto:support at heliontechnologies.com>
(p) (410) 252-8830
(F) (443) 541-1593

Visit us at www.heliontechnologies.com<http://www.heliontechnologies.com>
Support Issue? Email support at heliontechnologies.com<mailto:support at heliontechnologies.com> for fast assistance!

From: cisco-voip-bounces at puck.nether.net [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Kevin Dunn
Sent: Thursday, September 03, 2009 12:09 PM
To: Cisco Voice
Subject: [cisco-voip] Fixed Audio

Anyone use fixed audio in CUCM 7?

We had an XM radio feed into an audio card on our CCM 4.1.3 server.  That was a windows server audio card.

I am not sure how to add an audio card on the Linux server.  I see plenty of manuals on adding the "Fixed audio source in the MOH server" but not much on adding the actual hardware in the Linux box and where to install the drivers?

We went through a good deal of trouble getting XM to agree to let us transmit their signal on our phones.  I'd hate to see that (and my install of XM antennae going to waste.


Thanks

Kevin
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20090903/a979d238/attachment.html>