[cisco-voip] Fixed Audio

[Kevin Dunn]

awesome thanks

On Thu, Sep 3, 2009 at 11:15 AM, Matthew Loraditch <
MLoraditch at heliontechnologies.com> wrote:

>  You need to get the USB MOH Adapter Cisco Part: MOH-USB-AUDIO
>
>
>
> Plug it into the server and go.
>
>
>
> *Matthew Loraditch*
> 1965 Greenspring Drive
>
> Timonium, MD 21093
> support at heliontechnologies.com
> (p) (410) 252-8830
> (F) (443) 541-1593
>
> Visit us at www.heliontechnologies.com
> Support Issue? Email support at heliontechnologies.com for fast assistance!
>
>
>
> *From:* cisco-voip-bounces at puck.nether.net [mailto:
> cisco-voip-bounces at puck.nether.net] *On Behalf Of *Kevin Dunn
> *Sent:* Thursday, September 03, 2009 12:09 PM
> *To:* Cisco Voice
> *Subject:* [cisco-voip] Fixed Audio
>
>
>
> Anyone use fixed audio in CUCM 7?
>
>
>
> We had an XM radio feed into an audio card on our CCM 4.1.3 server.  That
> was a windows server audio card.
>
>
>
> I am not sure how to add an audio card on the Linux server.  I see plenty
> of manuals on adding the "Fixed audio source in the MOH server" but not much
> on adding the actual hardware in the Linux box and where to install the
> drivers?
>
>
>
> We went through a good deal of trouble getting XM to agree to let us
> transmit their signal on our phones.  I'd hate to see that (and my install
> of XM antennae going to waste.
>
>
>
>
>
> Thanks
>
>
>
> Kevin
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20090903/4556c354/attachment.html>