[cisco-voip] Unable to change default Numbering Plan on UCM 7.0.2

[Zahid Hassan]

Sorry, I would like to correct the below.

I still can not pick anything other then the default NANP under Route
Pattern Configuration.

Also, this is the NFR edition of the CUCM server.

So, not sure if this is anything to do with it.



Regards,



Zahid 
  

-----Original Message-----
From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Zahid Hassan
Sent: 07 September 2009 22:49
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] Unable to change default Numbering Plan on UCM 7.0.2

Dear All,


I am trying to change the default numbering plan from NANP to UKNP.

I have installed the locale file "cm-locale-en_GB-7.0.1.3000-1.cop.sgn" 
twice from the below location from CCO and rebooted the server. 

Voice and Unified Communications >
Cisco Unified Communications Manager Version 7.0 > Unified Communications
Manager/CallManager Locale Installer> 7.0(1.3000-1) 


I still can not pick anything other then UKNP under Route Pattern
Configuration.

Is anyone aware of any known issues with this ?


Many thanks in advance.


Regards,



Zahid 
 


_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip