[cisco-voip] Mask Inbound Calling NAME on MGCP T1 CAS Trunk?

[Wes Sisk]

if h.323 then station-name will work.  if mgcp currently no workaround 
without special scripting -

special scripting - send to an IP-IVR, allow it to set the the name via 
CTI and then redirect to true destination.

not currently possible to rewrite name in CM.

/Wes

On Tuesday, September 08, 2009 4:45:05 PM , Ted Nugent 
<tednugent73 at gmail.com> wrote:
> I have a client that just swung over their Corporate Tieline 
> from their PBX to the CallManager. There's no calling name for inbound 
> calls on the CAS trunk and apparently the Nortel it came off used to 
> mask "Corp Tieline" so that users didn't just get unknown number or 
> whatever on inbound calls. They are running CUCM 6.1 and I currently 
> have all inbound calls washed through a translation pattern to at 
> least mask a generic calling number on inbound calls coming through 
> that trunk but they really would like to have some sort of name 
> display. Can anyone think of a way to handle this, can you lock it in 
> on voiceport or something similar? It appears "station-id name" is 
> only used for outbound?? 
> TIA
> Ted
>
> ------------------------------------------------------------------------
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>   

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20090908/71e579c0/attachment.html>