[cisco-voip] Call out FXO port gives fxols_power_denial_proc

[Jason Aarons (US)]

I make a test call and via debug vpm signal I see the following on
2821/FXO controlled via MGCP. If I plug my buttset into this Bell
1FB/POTs line I can make calls fine.

                                        

ROUTER-2821-01#


Sep  9 16:12:56.251: htsp_timer_stop3 htsp_setup_req


Sep  9 16:12:56.255: htsp_process_event: [2/0/8, FXOLS_ONHOOK,
E_HTSP_SETUP_REQ]f

xols_onhook_setup


Sep  9 16:12:56.255: [2/0/8] set signal state = 0xC timestamp = 0


Sep  9 16:12:56.255: htsp_timer - 1300 msec


Sep  9 16:12:56.507: htsp_process_event: [2/0/8, FXOLS_WAIT_DIAL_TONE,
E_DSP_SIG_

1100]fxols_power_denial_proc


Sep  9 16:12:56.507: htsp_timer2 - 1000 msec


Sep  9 16:12:56.507: htsp_timer_stop


Sep  9 16:12:57.507: htsp_process_event: [2/0/8, FXOLS_WAIT_DIAL_TONE,
E_HTSP_EVE

NT_TIMER2]fxols_timer2_proc


Sep  9 16:12:57.507: htsp_timer_stop


Sep  9 16:12:57.507: htsp_timer_stop2


Sep  9 16:12:57.507: [2/0/8] set signal state = 0x4 timestamp = 0


Sep  9 16:12:57.511: htsp_process_event: [2/0/8, FXOLS_ONHOOK,
E_HTSP_RELEASE_REQ

]fxols_onhook_release


ROUTER-2821-01#




-----------------------------------------
Disclaimer:

This e-mail communication and any attachments may contain
confidential and privileged information and is for use by the
designated addressee(s) named above only.  If you are not the
intended addressee, you are hereby notified that you have received
this communication in error and that any use or reproduction of
this email or its contents is strictly prohibited and may be
unlawful.  If you have received this communication in error, please
notify us immediately by replying to this message and deleting it
from your computer. Thank you.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20090909/a17cc4df/attachment.html>