[cisco-voip] Call out FXO port gives fxols_power_denial_proc

[Nick Matthews]

Try:

voice-port 2/0/8
no supervisory-disconnect signal

There's a good chance you're detecting a power denial and hanging up
the call.  The reason the buttset isn't an accurate test for this
scenario is because your buttset will not disconnect on a power
denial.

If this configuration does fix your problem, it is only indicative
that you have other problems.

-nick

On Wed, Sep 9, 2009 at 12:16 PM, Jason Aarons
(US)<jason.aarons at us.didata.com> wrote:
> I make a test call and via debug vpm signal I see the following on 2821/FXO
> controlled via MGCP. If I plug my buttset into this Bell 1FB/POTs line I can
> make calls fine.
>
>
>
> ROUTER-2821-01#
>
> Sep  9 16:12:56.251: htsp_timer_stop3
> htsp_setup_req
>
> Sep  9 16:12:56.255: htsp_process_event: [2/0/8, FXOLS_ONHOOK,
> E_HTSP_SETUP_REQ]f
>
> xols_onhook_setup
>
> Sep  9 16:12:56.255: [2/0/8] set signal state = 0xC timestamp =
> 0
>
> Sep  9 16:12:56.255: htsp_timer - 1300
> msec
>
> Sep  9 16:12:56.507: htsp_process_event: [2/0/8, FXOLS_WAIT_DIAL_TONE,
> E_DSP_SIG_
>
> 1100]fxols_power_denial_proc
>
> Sep  9 16:12:56.507: htsp_timer2 - 1000
> msec
>
> Sep  9 16:12:56.507:
> htsp_timer_stop
>
> Sep  9 16:12:57.507: htsp_process_event: [2/0/8, FXOLS_WAIT_DIAL_TONE,
> E_HTSP_EVE
>
> NT_TIMER2]fxols_timer2_proc
>
> Sep  9 16:12:57.507:
> htsp_timer_stop
>
> Sep  9 16:12:57.507: htsp_timer_stop2
>
>
> Sep  9 16:12:57.507: [2/0/8] set signal state = 0x4 timestamp =
> 0
>
> Sep  9 16:12:57.511: htsp_process_event: [2/0/8, FXOLS_ONHOOK,
> E_HTSP_RELEASE_REQ
>
> ]fxols_onhook_release
>
>
> ROUTER-2821-01#
>
> ________________________________
>
> Disclaimer: This e-mail communication and any attachments may contain
> confidential and privileged information and is for use by the designated
> addressee(s) named above only. If you are not the intended addressee, you
> are hereby notified that you have received this communication in error and
> that any use or reproduction of this email or its contents is strictly
> prohibited and may be unlawful. If you have received this communication in
> error, please notify us immediately by replying to this message and deleting
> it from your computer. Thank you.
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>