[cisco-voip] Monitoring DHCP utilization rates on UCM

Cristobal Priego cristobalpriego at gmail.com
Fri Sep 11 12:59:00 EDT 2009


Cisco recommends using the CUCUM DHCP server if you have no more than 1000
devices registering to it. if you have more than 1000 devices you must use
an external DHCP server.


2009/9/10 Craig Staffin <cmstaffin at gmail.com>

> Cisco strongly discourages using UCM for DHCP.
> The only reason it is there is because the windows side had it.
>
> If you need DHCP you have a voice router somewhere in the environment that
> will give you far more options and flexibility.
>
> Craig
>
> On Sep 10, 2009, at 4:46 PM, Lelio Fulgenzi wrote:
>
> I usually start with "file list activelog *", but I don't see anything.
>
> ---
> Lelio Fulgenzi, B.A.
> Senior Analyst (CCS) * University of Guelph * Guelph, Ontario N1G 2W1
> (519) 824-4120 x56354 (519) 767-1060 FAX (JNHN)
> ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
> "Bad grammar makes me [sic]" - Tshirt
>
>
> ----- Original Message -----
> From: "Cristobal Priego" <cristobalpriego at gmail.com>
> To: "Lelio Fulgenzi" <lelio at uoguelph.ca>
> Cc: "Robert Kulagowski" <rkulagow at gmail.com>, cisco-voip at puck.nether.net
> Sent: Thursday, September 10, 2009 5:29:47 PM GMT -05:00 US/Canada Eastern
> Subject: Re: [cisco-voip] Monitoring DHCP utilization rates on UCM
>
> While I was on the boot camp 1 month ago.
> it was one of the questions when we started the bootcamp and Vik couldn't
> find the query or the command on the cli to see the bindings. i've been
> trying to find the command i went to every command on the cli and i couldn't
> find it
>
>
> if you happen to find it, it would be a great feedback
>
>
>
> 2009/9/10 Lelio Fulgenzi <lelio at uoguelph.ca>
>
>> That's the impression I got as well.
>>
>> I'm just looking at the v7 interface now and there is two options for
>> DHCP. Create/start/stop DHCP servers and Create/start/stop DHCP subnets.
>>
>> There might be a way to use the CLI and "file view" commands to see the
>> logs, etc. But that would hurt so much.
>>
>>
>> ---
>> Lelio Fulgenzi, B.A.
>> Senior Analyst (CCS) * University of Guelph * Guelph, Ontario N1G 2W1
>> (519) 824-4120 x56354 (519) 767-1060 FAX (JNHN)
>> ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
>> "Bad grammar makes me [sic]" - Tshirt
>>
>>
>>
>> ----- Original Message -----
>> From: "Robert Kulagowski" <rkulagow at gmail.com>
>> To: "Ccie" <pav.ccie at gmail.com>
>> Cc: cisco-voip at puck.nether.net
>> Sent: Thursday, September 10, 2009 5:05:32 PM GMT -05:00 US/Canada Eastern
>> Subject: Re: [cisco-voip] Monitoring DHCP utilization rates on UCM
>>
>> Ccie wrote:
>> > UCM 7.0
>> > Does anybody know if there is a way to monitor the DHCP server
>> > integrated into UCM.
>> > I am trying to get a list of bindings/ measure utilization rate and
>> > curious if there Is a way to do it on UCM / RTMT
>>
>> I'm 99% sure that I saw in this forum that using the built-in DHCP server
>>
>> is strongly discouraged, with the above being one of the things that it
>> lacks.
>> _______________________________________________
>> cisco-voip mailing list
>> cisco-voip at puck.nether.net
>> https://puck.nether.net/mailman/listinfo/cisco-voip
>>
>> _______________________________________________
>> cisco-voip mailing list
>> cisco-voip at puck.nether.net
>> https://puck.nether.net/mailman/listinfo/cisco-voip
>>
>>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20090911/6eeae465/attachment.html>


More information about the cisco-voip mailing list