[cisco-voip] Monitoring DHCP utilization rates on UCM

[Wes Sisk]

<from my previous post>
The DHCP server is marginally functional and has no serviceability, see

CSCsc75796    DHCP Server that is part of CCM should provide additional 
information
There should be a way of finding out which IP address is allocated to 
which phone, how many addresses are currently allocated etc. General 
management statistis for the DHCP service. Can't see anything in the GUI 
or RTMT that addresses this.

CSCso60222    After DHCP Monitor service is stopped, IP is given to DHCP 
clients

It is not a very effective DHCP server.

/Wes

On Friday, September 11, 2009 12:59:00 PM, Cristobal Priego 
<cristobalpriego at gmail.com> wrote:
> Cisco recommends using the CUCUM DHCP server if you have no more than 
> 1000 devices registering to it. if you have more than 1000 devices you 
> must use an external DHCP server.
>
>
> 2009/9/10 Craig Staffin <cmstaffin at gmail.com <mailto:cmstaffin at gmail.com>>
>
>     Cisco strongly discourages using UCM for DHCP.
>
>     The only reason it is there is because the windows side had it.
>
>     If you need DHCP you have a voice router somewhere in the
>     environment that will give you far more options and flexibility.
>
>     Craig
>
>     On Sep 10, 2009, at 4:46 PM, Lelio Fulgenzi wrote:
>
>>     I usually start with "file list activelog *", but I don't see
>>     anything.
>>
>>     ---
>>     Lelio Fulgenzi, B.A.
>>     Senior Analyst (CCS) * University of Guelph * Guelph, Ontario N1G 2W1
>>     (519) 824-4120 x56354 (519) 767-1060 FAX (JNHN)
>>     ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
>>     "Bad grammar makes me [sic]" - Tshirt
>>
>>
>>     ----- Original Message -----
>>     From: "Cristobal Priego" <cristobalpriego at gmail.com
>>     <mailto:cristobalpriego at gmail.com>>
>>     To: "Lelio Fulgenzi" <lelio at uoguelph.ca <mailto:lelio at uoguelph.ca>>
>>     Cc: "Robert Kulagowski" <rkulagow at gmail.com
>>     <mailto:rkulagow at gmail.com>>, cisco-voip at puck.nether.net
>>     <mailto:cisco-voip at puck.nether.net>
>>     Sent: Thursday, September 10, 2009 5:29:47 PM GMT -05:00
>>     US/Canada Eastern
>>     Subject: Re: [cisco-voip] Monitoring DHCP utilization rates on UCM
>>
>>     While I was on the boot camp 1 month ago. 
>>     it was one of the questions when we started the bootcamp and Vik
>>     couldn't find the query or the command on the cli to see the
>>     bindings. i've been trying to find the command i went to every
>>     command on the cli and i couldn't find it
>>
>>
>>     if you happen to find it, it would be a great feedback
>>
>>
>>
>>     2009/9/10 Lelio Fulgenzi <lelio at uoguelph.ca
>>     <mailto:lelio at uoguelph.ca>>
>>
>>         That's the impression I got as well.
>>
>>         I'm just looking at the v7 interface now and there is two
>>         options for DHCP. Create/start/stop DHCP servers and
>>         Create/start/stop DHCP subnets.
>>
>>         There might be a way to use the CLI and "file view" commands
>>         to see the logs, etc. But that would hurt so much.
>>
>>
>>         ---
>>         Lelio Fulgenzi, B.A.
>>         Senior Analyst (CCS) * University of Guelph * Guelph, Ontario
>>         N1G 2W1
>>         (519) 824-4120 x56354 (519) 767-1060 FAX (JNHN)
>>         ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
>>         "Bad grammar makes me [sic]" - Tshirt
>>
>>
>>
>>         ----- Original Message -----
>>         From: "Robert Kulagowski" <rkulagow at gmail.com
>>         <mailto:rkulagow at gmail.com>>
>>         To: "Ccie" <pav.ccie at gmail.com <mailto:pav.ccie at gmail.com>>
>>         Cc: cisco-voip at puck.nether.net
>>         <mailto:cisco-voip at puck.nether.net>
>>         Sent: Thursday, September 10, 2009 5:05:32 PM GMT -05:00
>>         US/Canada Eastern
>>         Subject: Re: [cisco-voip] Monitoring DHCP utilization rates
>>         on UCM
>>
>>         Ccie wrote:
>>         > UCM 7.0
>>         > Does anybody know if there is a way to monitor the DHCP server 
>>         > integrated into UCM.
>>         > I am trying to get a list of bindings/ measure utilization
>>         rate and 
>>         > curious if there Is a way to do it on UCM / RTMT
>>
>>         I'm 99% sure that I saw in this forum that using the built-in
>>         DHCP server 
>>         is strongly discouraged, with the above being one of the
>>         things that it lacks.
>>         _______________________________________________
>>         cisco-voip mailing list
>>         cisco-voip at puck.nether.net <mailto:cisco-voip at puck.nether.net>
>>         https://puck.nether.net/mailman/listinfo/cisco-voip
>>
>>         _______________________________________________
>>         cisco-voip mailing list
>>         cisco-voip at puck.nether.net <mailto:cisco-voip at puck.nether.net>
>>         https://puck.nether.net/mailman/listinfo/cisco-voip
>>
>>
>>     _______________________________________________
>>     cisco-voip mailing list
>>     cisco-voip at puck.nether.net <mailto:cisco-voip at puck.nether.net>
>>     https://puck.nether.net/mailman/listinfo/cisco-voip
>
>
> ------------------------------------------------------------------------
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>   

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20090915/f4e93719/attachment.html>