[cisco-voip] CallerIP trough FXO port

[Ratko Dodevski]

Hi, does anyone had already this kind of problem. A have my GSM adapter on
plugged into VIC2-2FXO card and all incoming calls are representing as
External Dial Unknown Number. Here is my voice-port config and dial-peer.
Also, is there a way to use FXS ports instead?

voice-port 0/3/0
 supervisory disconnect anytone
 cptone DE
 timeouts call-disconnect 0
 timeouts ringing 30
 timeouts wait-release 5
 connection plar 101
 impedance complex2
 bearer-cap Speech
 caller-id alerting dsp-pre-allocate

dial-peer voice 70 pots
 destination-pattern 070......
 direct-inward-dial
 port 0/3/0
 prefix 070

Any help would be appreciated.

Regards

-- 
Ratko
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20090915/1e393c5b/attachment.html>