[cisco-voip] CallerIP trough FXO port

[Ratko Dodevski]

I forgot to mention that i use H323 gateway and CUCM 7



On Tue, Sep 15, 2009 at 9:31 PM, Ratko Dodevski <rade239 at gmail.com> wrote:

> Hi, does anyone had already this kind of problem. A have my GSM adapter on
> plugged into VIC2-2FXO card and all incoming calls are representing as
> External Dial Unknown Number. Here is my voice-port config and dial-peer.
> Also, is there a way to use FXS ports instead?
>
> voice-port 0/3/0
>  supervisory disconnect anytone
>  cptone DE
>  timeouts call-disconnect 0
>  timeouts ringing 30
>  timeouts wait-release 5
>  connection plar 101
>  impedance complex2
>  bearer-cap Speech
>  caller-id alerting dsp-pre-allocate
>
> dial-peer voice 70 pots
>  destination-pattern 070......
>  direct-inward-dial
>  port 0/3/0
>  prefix 070
>
> Any help would be appreciated.
>
> Regards
>
> --
> Ratko
>



-- 
Ratko
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20090915/507874fc/attachment.html>