[cisco-voip] CallerIP trough FXO port

[Dane Newman]

I have the same issue

When I call comes into my fxo port I get unknown number  Can anyone assist
with this?  Im using CUCM 7.0 and a 2801 h323 gateway


voice-port 0/0/0
 trunk-group FXOPORTS
 echo-cancel coverage 32
 timeouts interdigit 7
 connection plar opx 500
 description ******
 caller-id enable

On Tue, Sep 15, 2009 at 4:33 PM, Ratko Dodevski <rade239 at gmail.com> wrote:

> I forgot to mention that i use H323 gateway and CUCM 7
>
>
>
>
> On Tue, Sep 15, 2009 at 9:31 PM, Ratko Dodevski <rade239 at gmail.com> wrote:
>
>> Hi, does anyone had already this kind of problem. A have my GSM adapter on
>> plugged into VIC2-2FXO card and all incoming calls are representing as
>> External Dial Unknown Number. Here is my voice-port config and dial-peer.
>> Also, is there a way to use FXS ports instead?
>>
>> voice-port 0/3/0
>>  supervisory disconnect anytone
>>  cptone DE
>>  timeouts call-disconnect 0
>>  timeouts ringing 30
>>  timeouts wait-release 5
>>  connection plar 101
>>  impedance complex2
>>  bearer-cap Speech
>>  caller-id alerting dsp-pre-allocate
>>
>> dial-peer voice 70 pots
>>  destination-pattern 070......
>>  direct-inward-dial
>>  port 0/3/0
>>  prefix 070
>>
>> Any help would be appreciated.
>>
>> Regards
>>
>> --
>> Ratko
>>
>
>
>
> --
> Ratko
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20090916/a6b2d014/attachment.html>