[cisco-voip] H.225 Gatekeeper Trunk or ICT Non-Gatekeeper Controlled Trunk

[Wes Sisk]

CM's software conference bridge only does g.711 so you would need a 
transcoder. alternatively, you could just use the dsp's as a hardware 
conference bridge for g.729 calls.  this is the typical approach.

/wes

On Wednesday, September 16, 2009 11:19:20 AM, steve.siltman at assurant.com 
wrote:
>
> I'm stuck.  Both of these trunks work great for call routing.  Neither 
> of these work when I try to conference two parties together.  What am 
> I missing?  I have these trunks using there own Device Pool with there 
> own region.  I have tried to put Call Manager software media resources 
> in an MRG/MRGL and applied it to both the device pool and trunks on 
> both sides.  I have these regions using G.729.  
>
> Throw me a bone please.
>
> -Steve
>
> ------------------------------------------------------------------------
> This e-mail message and all attachments transmitted with it may 
> contain legally privileged and/or confidential information intended 
> solely for the use of the addressee(s). If the reader of this message 
> is not the intended recipient, you are hereby notified that any 
> reading, dissemination, distribution, copying, forwarding or other use 
> of this message or its attachments is strictly prohibited. If you have 
> received this message in error, please notify the sender immediately 
> and delete this message and all copies and backups thereof.
>
> Thank you.
>
> ------------------------------------------------------------------------
> ------------------------------------------------------------------------
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>   

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20090916/842a4851/attachment.html>