[cisco-voip] CallerIP trough FXO port
Dane Newman
dane.newman at gmail.com
Wed Sep 16 18:29:59 EDT 2009
Hmm I only get this
Cisco2801(config-voiceport)#caller-id ?
alerting Define caller id alerting method
enable Enable caller id on this port
Cisco2801(config-voiceport)#caller-id al ?
ring during ring
Cisco2801(config-voiceport)#caller-id al ring ?
<1-4> number of ring on cycles
Cisco2801(config-voiceport)#caller-id al ring 4 ?
<cr>
Cisco2801(config-voiceport)#caller-id al ring 4
I tried every setting but still no caller id it shows up as unknow what do I
have to debug to figure this out or anyone have any ideas
On Wed, Sep 16, 2009 at 4:27 PM, Ratko Dodevski <rade239 at gmail.com> wrote:
> sorry.. it's caller-id alerting pre-ring.... *
> *
> *regards
> *
>
> On Wed, Sep 16, 2009 at 10:25 PM, Ratko Dodevski <rade239 at gmail.com>wrote:
>
>> GSM adapter is device in whic you put SIM card and I use it for my mobile
>> calls to go trough that SIM card cos it's cheaper. Also I forgot to mention
>> that you might need to set caller-id alerting parameters. You can try
>> several. pre-dial, during dial... pre dial worked for me.
>> Ratko
>>
>>
>> On Wed, Sep 16, 2009 at 10:01 PM, Dane Newman <dane.newman at gmail.com>wrote:
>>
>>> Thanks man forgive me for asking but what is gsm I connected my fxo
>>> into my comcast cable modem caller I'd works with a regular phone connected
>>> in
>>>
>>> Sent from my iPhone
>>>
>>> On Sep 16, 2009, at 3:37 PM, Ratko Dodevski <rade239 at gmail.com> wrote:
>>>
>>> Hi Dane, I solved my problem... It was the GSM adapter :))) I plugged
>>> phone with Caller Id and find out that GSM doesn't provide CLID. So I
>>> connected to the adapter and set it to send CLID.
>>>
>>>
>>> Best Regards
>>> Ratko
>>>
>>> On Wed, Sep 16, 2009 at 6:25 PM, Dane Newman < <dane.newman at gmail.com>
>>> dane.newman at gmail.com> wrote:
>>>
>>>> My full router config is as follows
>>>>
>>>> Cisco2801#sh run
>>>> Building configuration...
>>>>
>>>> Current configuration : 9848 bytes
>>>> !
>>>> version 12.4
>>>> service timestamps debug datetime msec
>>>> service timestamps log datetime localtime
>>>> service password-encryption
>>>> !
>>>> hostname Cisco2801
>>>> !
>>>> boot-start-marker
>>>> boot-end-marker
>>>> !
>>>> logging message-counter syslog
>>>> no logging buffered
>>>> no logging monitor
>>>> enable secret 5 $1$Sz.G$hunXhcScXrQkHmAllKj4.0
>>>> !
>>>> aaa new-model
>>>> !
>>>> !
>>>> aaa authentication login default local
>>>> aaa authentication login ezvpnuserauth local
>>>> aaa authorization exec default local
>>>> aaa authorization network default local
>>>> aaa authorization network ezvpngroupauth local
>>>> !
>>>> !
>>>> aaa session-id common
>>>> errdisable recovery cause bpduguard
>>>> errdisable recovery interval 400
>>>> dot11 syslog
>>>> ip source-route
>>>> !
>>>> !
>>>> !
>>>> !
>>>> ip cef
>>>> no ip domain lookup
>>>> ip domain name datasc.local
>>>> ip inspect udp idle-time 1800
>>>> ip inspect name CBAC tcp
>>>> ip inspect name CBAC udp
>>>> ip inspect name CBAC icmp
>>>> no ipv6 cef
>>>> ntp server 129.6.15.28
>>>> !
>>>> multilink bundle-name authenticated
>>>> !
>>>> !
>>>> !
>>>> !
>>>> !
>>>> !
>>>> trunk group FXOPORTS
>>>> !
>>>> !
>>>> !
>>>> voice service pots
>>>> !
>>>> voice service voip
>>>> fax protocol cisco
>>>> h323
>>>> no h225 timeout keepalive
>>>> !
>>>> !
>>>> !
>>>> !
>>>> !
>>>> !
>>>> voice class h323 50
>>>> h225 timeout tcp establish 3
>>>> !
>>>> !
>>>> !
>>>> !
>>>> !
>>>> !
>>>> !
>>>> !
>>>> !
>>>> !
>>>> !
>>>> voice-card 0
>>>> dsp services dspfarm
>>>> !
>>>> !
>>>> application
>>>> global
>>>> service alternate default
>>>> !
>>>> !
>>>> !
>>>> crypto pki trustpoint TP-self-signed-2766443098
>>>> enrollment selfsigned
>>>> subject-name cn=IOS-Self-Signed-Certificate-2766443098
>>>> revocation-check none
>>>> rsakeypair TP-self-signed-2766443098
>>>> !
>>>> !
>>>> crypto pki certificate chain TP-self-signed-2766443098
>>>> certificate self-signed 01
>>>> 3082024E 308201B7 A0030201 02020101 300D0609 2A864886 F70D0101
>>>> 04050030
>>>> 31312F30 2D060355 04031326 494F532D 53656C66 2D536967 6E65642D
>>>> 43657274
>>>> 69666963 6174652D 32373636 34343330 3938301E 170D3039 30383038
>>>> 30313537
>>>> 35305A17 0D323030 31303130 30303030 305A3031 312F302D 06035504
>>>> 03132649
>>>> 4F532D53 656C662D 5369676E 65642D43 65727469 66696361 74652D32
>>>> 37363634
>>>> 34333039 3830819F 300D0609 2A864886 F70D0101 01050003 818D0030
>>>> 81890281
>>>> 8100F024 7897883D 2917DD31 A92AFC92 5FF90B0B 87C59186 1DA717E6
>>>> 7DC7113F
>>>> 78FB9546 891FAF14 94296F95 1A269F0A 1945EF5D 02501E85 84CF230A
>>>> 1945FFD8
>>>> 6A0952FD 5B97A0B3 CF83D474 59D24A1E 3CDBF52F 1245C023 0905CD43
>>>> DDCFAE77
>>>> 56347A58 B91E076E 7C6E39B8 212C15D1 5E6AE9F7 B75E36E5 2EA5EBF6
>>>> 20888E4C
>>>> A78F0203 010001A3 76307430 0F060355 1D130101 FF040530 030101FF
>>>> 30210603
>>>> 551D1104 1A301882 16436973 636F3238 30312E64 61746173 632E6C6F
>>>> 63616C30
>>>> 1F060355 1D230418 30168014 41650862 0AD93B9A 9639B46B 339E916B
>>>> A2762CAB
>>>> 301D0603 551D0E04 16041441 6508620A D93B9A96 39B46B33 9E916BA2
>>>> 762CAB30
>>>> 0D06092A 864886F7 0D010104 05000381 8100A84C 200FC75E 17F51DB1
>>>> 0F14F173
>>>> 364AE98E 886DE050 8FB015C9 FD057C62 2E01286A 0216D04E 08DB02F8
>>>> B52B6BB1
>>>> 2A2710E4 73A8876A 1570E4A9 75A77B33 59B244C8 47AD12C8 7A3441A5
>>>> EEE48002
>>>> 20FA0B1F A0B0803D 4FF86CD2 4D69B649 7DD6D151 0EC8A3CF E6B278F5
>>>> DC40598C
>>>> 00E4DDC2 58CAD837 9D4C1738 9CA1F850 6F2C
>>>> quit
>>>> !
>>>> !
>>>> username ******** privilege 15 secret 5 *********
>>>> archive
>>>> log config
>>>> hidekeys
>>>> !
>>>> !
>>>> crypto isakmp policy 20
>>>> encr aes 192
>>>> authentication pre-share
>>>> group 2
>>>> crypto isakmp key Recoil90 address 0.0.0.0 0.0.0.0
>>>> crypto isakmp fragmentation
>>>> !
>>>> crypto isakmp client configuration group datasc
>>>> key Recoil90
>>>> dns 10.1.80.2 10.1.80.3
>>>> domain datasc.local
>>>> pool REMOTEVPNPOOL
>>>> acl 150
>>>> crypto isakmp profile ezvpn
>>>> match identity group datasc
>>>> client authentication list ezvpnuserauth
>>>> isakmp authorization list ezvpngroupauth
>>>> client configuration address respond
>>>> !
>>>> !
>>>> crypto ipsec transform-set ezvpntransform esp-aes esp-sha-hmac
>>>> !
>>>> crypto dynamic-map dynmap 20
>>>> set transform-set ezvpntransform
>>>> set isakmp-profile ezvpn
>>>> reverse-route
>>>> !
>>>> !
>>>> crypto map dynmap 1 ipsec-isakmp dynamic dynmap
>>>> !
>>>> !
>>>> crypto key pubkey-chain rsa
>>>> named-key realm-cisco.pub
>>>> key-string
>>>> 30820122 300D0609 2A864886 F70D0101 01050003 82010F00 3082010A
>>>> 02820101
>>>> 00C19E93 A8AF124A D6CC7A24 5097A975 206BE3A2 06FBA13F 6F12CB5B
>>>> 4E441F16
>>>> 17E630D5 C02AC252 912BE27F 37FDD9C8 11FC7AF7 DCDD81D9 43CDABC3
>>>> 6007D128
>>>> B199ABCB D34ED0F9 085FADC1 359C189E F30AF10A C0EFB624 7E0764BF
>>>> 3E53053E
>>>> 5B2146A9 D7A5EDE3 0298AF03 DED7A5B8 9479039D 20F30663 9AC64B93
>>>> C0112A35
>>>> FE3F0C87 89BCB7BB 994AE74C FA9E481D F65875D6 85EAF974 6D9CC8E3
>>>> F0B08B85
>>>> 50437722 FFBE85B9 5E4189FF CC189CB9 69C46F9C A84DFBA5 7A0AF99E
>>>> AD768C36
>>>> 006CF498 079F88F8 A3B3FB1F 9FB7B3CB 5539E1D1 9693CCBB 551F78D2
>>>> 892356AE
>>>> 2F56D826 8918EF3C 80CA4F4D 87BFCA3B BFF668E9 689782A5 CF31CB6E
>>>> B4B094D3
>>>> F3020301 0001
>>>> quit
>>>> !
>>>> !
>>>> !
>>>> !
>>>> !
>>>> !
>>>> interface FastEthernet0/0
>>>> bandwidth 16000
>>>> ip address dhcp
>>>> ip access-group internet in
>>>> no ip redirects
>>>> no ip unreachables
>>>> no ip proxy-arp
>>>> ip nbar protocol-discovery
>>>> ip flow ingress
>>>> ip flow egress
>>>> ip nat outside
>>>> ip inspect CBAC out
>>>> ip virtual-reassembly
>>>> speed 100
>>>> full-duplex
>>>> crypto map dynmap
>>>> !
>>>> interface FastEthernet0/1
>>>> ip address 10.1.200.1 255.255.255.252
>>>> ip nbar protocol-discovery
>>>> ip flow ingress
>>>> ip flow egress
>>>> ip nat inside
>>>> ip virtual-reassembly
>>>> duplex auto
>>>> speed auto
>>>> h323-gateway voip bind srcaddr 10.1.200.1
>>>> !
>>>> interface FastEthernet0/1/0
>>>> description ConnectionDell2900DMZ
>>>> switchport access vlan 150
>>>> spanning-tree portfast
>>>> !
>>>> interface FastEthernet0/1/1
>>>> switchport access vlan 150
>>>> spanning-tree portfast
>>>> !
>>>> interface FastEthernet0/1/2
>>>> !
>>>> interface FastEthernet0/1/3
>>>> !
>>>> interface Vlan1
>>>> no ip address
>>>> !
>>>> interface Vlan150
>>>> ip address 10.1.150.1 255.255.255.0
>>>> ip nbar protocol-discovery
>>>> ip flow ingress
>>>> ip flow egress
>>>> ip nat inside
>>>> ip virtual-reassembly
>>>> !
>>>> router eigrp 1
>>>> network 10.0.0.0
>>>> network 172.16.0.0
>>>> no auto-summary
>>>> !
>>>> ip local pool REMOTEVPNPOOL 10.250.1.10 10.250.1.150
>>>> ip forward-protocol nd
>>>> ip route 0.0.0.0 0.0.0.0 66.56.50.1
>>>> ip route 96.57.19.26 255.255.255.255 66.56.50.1
>>>> ip http server
>>>> ip http authentication local
>>>> ip http secure-server
>>>> !
>>>> ip flow-cache timeout active 1
>>>> ip flow-export version 5
>>>> ip flow-export destination 10.1.80.5 9996
>>>> !
>>>> ip nat inside source list NATNETWORKS interface FastEthernet0/0 overload
>>>> ip nat inside source static tcp 10.1.150.150 80 interface
>>>> FastEthernet0/0 8080
>>>> !
>>>> ip access-list extended NATNETWORKS
>>>> permit ip 10.1.0.0 0.0.255.255 any
>>>> ip access-list extended internet
>>>> permit udp any any eq isakmp
>>>> permit tcp any any eq 22
>>>> permit udp any eq bootps any eq bootpc
>>>> permit icmp any any echo
>>>> permit icmp any any echo-reply
>>>> permit icmp any any traceroute
>>>> permit gre any any
>>>> permit esp any any
>>>> permit tcp any any eq 5001
>>>> permit tcp any any eq www
>>>> permit tcp any any eq 8080
>>>> permit udp any any eq non500-isakmp
>>>> !
>>>> logging trap errors
>>>> logging source-interface FastEthernet0/1
>>>> logging 10.1.80.5
>>>> access-list 150 permit ip 10.1.0.0 0.0.255.255 any
>>>> !
>>>> !
>>>> !
>>>> !
>>>> !
>>>> control-plane
>>>> !
>>>> !
>>>> !
>>>> voice-port 0/0/0
>>>> trunk-group FXOPORTS
>>>> echo-cancel coverage 32
>>>> timeouts interdigit 7
>>>> connection plar opx 102
>>>> description 770-892-5514
>>>> caller-id enable
>>>> !
>>>> voice-port 0/0/1
>>>> trunk-group FXOPORTS
>>>> echo-cancel coverage 32
>>>> timeouts interdigit 7
>>>> connection plar opx 102
>>>> caller-id enable
>>>> !
>>>> !
>>>> no mgcp timer receive-rtcp
>>>> mgcp fax t38 ecm
>>>> mgcp behavior g729-variants static-pt
>>>> !
>>>> !
>>>> dspfarm profile 1 transcode
>>>> associate application SCCP
>>>> !
>>>> !
>>>> dial-peer voice 501 pots
>>>> trunkgroup FXOPORTS
>>>> description Services
>>>> destination-pattern [2-8]11
>>>> progress_ind setup enable 3
>>>> progress_ind progress enable 8
>>>> forward-digits all
>>>> !
>>>> dial-peer voice 511 pots
>>>> trunkgroup FXOPORTS
>>>> description local seven digit
>>>> destination-pattern [2-9]......
>>>> progress_ind setup enable 3
>>>> progress_ind progress enable 8
>>>> forward-digits all
>>>> !
>>>> dial-peer voice 521 pots
>>>> trunkgroup FXOPORTS
>>>> description local ten digit
>>>> destination-pattern 770.......
>>>> progress_ind setup enable 3
>>>> progress_ind progress enable 8
>>>> forward-digits all
>>>> !
>>>> dial-peer voice 531 pots
>>>> trunkgroup FXOPORTS
>>>> description long distance
>>>> destination-pattern [2-9]........
>>>> progress_ind setup enable 3
>>>> progress_ind progress enable 8
>>>> forward-digits all
>>>> !
>>>> dial-peer voice 571 pots
>>>> trunkgroup FXOPORTS
>>>> description long distance with one
>>>> destination-pattern 1[2-9]........
>>>> progress_ind setup enable 3
>>>> progress_ind progress enable 8
>>>> forward-digits all
>>>> !
>>>> dial-peer voice 541 pots
>>>> trunkgroup FXOPORTS
>>>> description toll free distance
>>>> destination-pattern 1[800,866,877,888].......
>>>> progress_ind setup enable 3
>>>> progress_ind progress enable 8
>>>> forward-digits all
>>>> !
>>>> dial-peer voice 551 pots
>>>> trunkgroup FXOPORTS
>>>> description premium distance
>>>> destination-pattern 1[900,976].......
>>>> progress_ind setup enable 3
>>>> progress_ind progress enable 8
>>>> forward-digits all
>>>> !
>>>> dial-peer voice 561 pots
>>>> trunkgroup FXOPORTS
>>>> description international
>>>> destination-pattern 011...........
>>>> progress_ind setup enable 3
>>>> progress_ind progress enable 8
>>>> forward-digits all
>>>> !
>>>> dial-peer voice 911 pots
>>>> trunkgroup FXOPORTS
>>>> description 911 Call
>>>> destination-pattern 911
>>>> forward-digits all
>>>> !
>>>> dial-peer voice 1000 pots
>>>> description incoming Call
>>>> preference 1
>>>> incoming called-number 7708925414
>>>> port 0/0/0
>>>> !
>>>> dial-peer voice 1001 pots
>>>> description incoming Call backup
>>>> preference 2
>>>> incoming called-number 7708925413
>>>> port 0/0/1
>>>> !
>>>> dial-peer voice 100 voip
>>>> description 1xx extension to PUBLISHER
>>>> preference 1
>>>> destination-pattern 1..
>>>> progress_ind setup enable 3
>>>> progress_ind progress enable 8
>>>> voice-class h323 50
>>>> session target ipv4:10.1.80.6
>>>> dtmf-relay h245-alphanumeric
>>>> codec g711ulaw
>>>> no vad
>>>> !
>>>> dial-peer voice 101 voip
>>>> description 1xx extension to subscriber
>>>> preference 2
>>>> destination-pattern 1..
>>>> progress_ind setup enable 3
>>>> progress_ind progress enable 8
>>>> voice-class h323 50
>>>> session target ipv4:10.1.80.7
>>>> dtmf-relay h245-alphanumeric
>>>> codec g711ulaw
>>>> no vad
>>>> !
>>>> !
>>>> !
>>>> !
>>>> gatekeeper
>>>> shutdown
>>>> !
>>>> !
>>>> line con 0
>>>> line aux 0
>>>> line vty 0 4
>>>> privilege level 15
>>>> transport input ssh
>>>> line vty 5 15
>>>> privilege level 15
>>>> transport input ssh
>>>> !
>>>> scheduler allocate 20000 1000
>>>> end
>>>> Cisco2801#
>>>> Cisco2801#
>>>> Cisco2801#
>>>>
>>>> On Wed, Sep 16, 2009 at 12:14 PM, Dane Newman <<dane.newman at gmail.com>
>>>> dane.newman at gmail.com> wrote:
>>>>
>>>>> I have the same issue
>>>>>
>>>>> When I call comes into my fxo port I get unknown number Can anyone
>>>>> assist with this? Im using CUCM 7.0 and a 2801 h323 gateway
>>>>>
>>>>>
>>>>> voice-port 0/0/0
>>>>> trunk-group FXOPORTS
>>>>> echo-cancel coverage 32
>>>>> timeouts interdigit 7
>>>>> connection plar opx 500
>>>>> description ******
>>>>> caller-id enable
>>>>>
>>>>> On Tue, Sep 15, 2009 at 4:33 PM, Ratko Dodevski <<rade239 at gmail.com>
>>>>> rade239 at gmail.com> wrote:
>>>>>
>>>>>> I forgot to mention that i use H323 gateway and CUCM 7
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>> On Tue, Sep 15, 2009 at 9:31 PM, Ratko Dodevski < <rade239 at gmail.com>
>>>>>> rade239 at gmail.com> wrote:
>>>>>>
>>>>>>> Hi, does anyone had already this kind of problem. A have my GSM
>>>>>>> adapter on plugged into VIC2-2FXO card and all incoming calls are
>>>>>>> representing as External Dial Unknown Number. Here is my voice-port config
>>>>>>> and dial-peer. Also, is there a way to use FXS ports instead?
>>>>>>>
>>>>>>> voice-port 0/3/0
>>>>>>> supervisory disconnect anytone
>>>>>>> cptone DE
>>>>>>> timeouts call-disconnect 0
>>>>>>> timeouts ringing 30
>>>>>>> timeouts wait-release 5
>>>>>>> connection plar 101
>>>>>>> impedance complex2
>>>>>>> bearer-cap Speech
>>>>>>> caller-id alerting dsp-pre-allocate
>>>>>>>
>>>>>>> dial-peer voice 70 pots
>>>>>>> destination-pattern 070......
>>>>>>> direct-inward-dial
>>>>>>> port 0/3/0
>>>>>>> prefix 070
>>>>>>>
>>>>>>> Any help would be appreciated.
>>>>>>>
>>>>>>> Regards
>>>>>>>
>>>>>>> --
>>>>>>> Ratko
>>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>> --
>>>>>> Ratko
>>>>>>
>>>>>> _______________________________________________
>>>>>> cisco-voip mailing list
>>>>>> <cisco-voip at puck.nether.net>cisco-voip at puck.nether.net
>>>>>> <https://puck.nether.net/mailman/listinfo/cisco-voip>
>>>>>> https://puck.nether.net/mailman/listinfo/cisco-voip
>>>>>>
>>>>>>
>>>>>
>>>>
>>>
>>>
>>> --
>>> Ratko
>>>
>>>
>>
>>
>> --
>> Ratko
>>
>
>
>
> --
> Ratko
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20090916/f9fe3501/attachment.html>
More information about the cisco-voip
mailing list