[cisco-voip] CallerIP trough FXO port

Dane Newman dane.newman at gmail.com
Wed Sep 16 18:46:17 EDT 2009


Im getting this on a debug

Cisco2801(config)#logging moni 7
Cisco2801(config)#exit
Cisco2801#
*Sep 16 22:45:08: %SYS-5-CONFIG_I: Configured from console by dnewman on
vty0 (10.1.150.125)
Cisco2801#
Cisco2801#
*Sep 16 22:45:15.009: htsp_process_event: [0/0/0, FXOLS_ONHOOK,
E_DSP_SIG_0000]fxols_onhook_ringing
*Sep 16 22:45:15.009: TGRM: reg_invoke_tgrm_call_update(0, 0, 0, 65535, 1,
TGRM_CALL_PENDING, TGRM_CALL_VOICE, TGRM_DIRECTION_IN)
*Sep 16 22:45:15.009: htsp_timer - 125 msec
*Sep 16 22:45:15.137: htsp_process_event: [0/0/0, FXOLS_WAIT_RING_MIN,
E_HTSP_EVENT_TIMER]fxols_wait_ring_min_timer
*Sep 16 22:45:15.137: htsp_timer - 10000 msec
*Sep 16 22:45:15.137: htsp_timer3 - 5600 msec
*Sep 16 22:45:15.137: [0/0/0] htsp_start_caller_id_rx:BELLCORE
*Sep 16 22:45:15.137:
//-1/313233343930/DSM:(0/0/0):-1/dsp_stream_mgr_create: .
*Sep 16 22:45:15.137:
//-1/313233343930/DSM:(0/0/0):-1/set_echo_canceller_data: echo_cancel: 0
*Sep 16 22:45:15.137:
//-1/313233343930/DSM:(0/0/0):-1/set_echo_canceller_data: echo_flags: 38,
echo_len: 256
*Sep 16 22:45:15.137: htsp_start_caller_id_rx create dsp_stream_manager
*Sep 16 22:45:15.137:
//-1/313233343930/DSM:(0/0/0):-1/dsp_stream_mgr_set_dsp_allocated: .
*Sep 16 22:45:15.137:
//-1/313233343930/DSM:(0/0/0):-1/dsp_stream_mgr_implement_feature:
*Sep 16 22:45:15.141: dsp_stream_mgr_implement_feature: feature id = 7
*Sep 16 22:45:15.145:
//-1/313233343930/DSM:(0/0/0):-1/dsmp_dsmapi_reserve_resource_cb: .
*Sep 16 22:45:15.145: [0/0/0] htsp_dsm_create_success  returns 1
*Sep 16 22:45:17.077: htsp_process_event: [0/0/0, FXOLS_RINGING,
E_DSP_SIG_0100]
*Sep 16 22:45:17.077: fxols_ringing_not
*Sep 16 22:45:17.077: htsp_timer_stop
*Sep 16 22:45:17.077: htsp_timer - 10000 msec
*Sep 16 22:45:20.737: htsp_process_event: [0/0/0, FXOLS_RINGING,
E_HTSP_EVENT_TIMER3]fxols_snoop_clid_stop
*Sep 16 22:45:20.737: htsp_timer_stop3
*Sep 16 22:45:21.009: htsp_process_event: [0/0/0, FXOLS_RINGING,
E_DSP_SIG_0000]
*Sep 16 22:45:23.077: htsp_process_event: [0/0/0, FXOLS_RINGING,
E_DSP_SIG_0100]
*Sep 16 22:45:23.077: fxols_ringing_not
*Sep 16 22:45:23.077: htsp_timer_stop
*Sep 16 22:45:23.077: htsp_timer_stop3
*Sep 16 22:45:23.077:
//-1/313233343930/DSM:(0/0/0):-1/dsp_stream_mgr_destroy: .
*Sep 16 22:45:23.077:
//-1/313233343930/DSM:(0/0/0):-1/dsm_delete_all_streams: .
*Sep 16 22:45:23.081:
//-1/313233343930/DSM:(0/0/0):-1/dsmapi_accept_modem_passthrough_session:  :
dmgr: 68F25A64, active sessions 0, max sessions: 16 rejected sessions till
now: 0
*Sep 16 22:45:23.081: [0/0/0] htsp_stop_caller_id_rx. message length
0htsp_setup_ind
*Sep 16 22:45:23.081: [0/0/0] get_fxo_caller_id:Caller ID receive failed.
parseCallerIDString:no data.
*Sep 16 22:45:23.081: [0/0/0] get_local_station_id calling num= calling
name= calling time=09/16 22:45  orig called=
*Sep 16 22:45:23.081: TGRM: reg_invoke_tgrm_accept_call(1, TGRM_CALL_VOICE,
TGRM_DIRECTION_IN, 0, 0, 0, 65535)
*Sep 16 22:45:23.081: TGRM: Calling vtsp_tsp_call_setup_ind().
*Sep 16 22:45:23.097: htsp_process_event: [0/0/0, FXOLS_WAIT_SETUP_ACK,
E_HTSP_SETUP_ACK]
*Sep 16 22:45:23.097: fxols_wait_setup_ack:
*Sep 16 22:45:23.097: htsp_timer - 6000 msec
*Sep 16 22:45:23.125: htsp_process_event: [0/0/0, FXOLS_PROCEEDING,
E_HTSP_PROCEEDING]fxols_offhook_proc
*Sep 16 22:45:23.129: flex_dsprm_close_cleanup
*Sep 16 22:45:23.129:
//-1/313233343930/DSM:(0/0/0):-1/dsmp_dsmapi_reserve_resource_cb: .
*Sep 16 22:45:23.129: [0/0/0] htsp_dsm_close_donehtsp_alert_notify
*Sep 16 22:45:23.157: htsp_process_event: [0/0/0, FXOLS_PROCEEDING,
E_HTSP_ALERT]fxols_offhook_alerthtsp_call_service_msghtsp_call_service_msg
not EFXS (2)
*Sep 16 22:45:27.009: htsp_process_event: [0/0/0, FXOLS_PROCEEDING,
E_DSP_SIG_0000]fxols_proceed_ring
*Sep 16 22:45:27.009: htsp_timer_stop
*Sep 16 22:45:27.009: htsp_timer_stop2
*Sep 16 22:45:29.077: htsp_process_event: [0/0/0, FXOLS_PROCEEDING,
E_DSP_SIG_0100]fxols_proceed_clear
*Sep 16 22:45:29.077: htsp_timer_stop2
*Sep 16 22:45:29.077: htsp_timer - 6000 msec
*Sep 16 22:45:33.009: htsp_process_event: [0/0/0, FXOLS_PROCEEDING,
E_DSP_SIG_0000]fxols_proceed_ring
*Sep 16 22:45:33.009: htsp_timer_stop
*Sep 16 22:45:33.009: htsp_timer_stop2
*Sep 16 22:45:35.077: htsp_process_event: [0/0/0, FXOLS_PROCEEDING,
E_DSP_SIG_0100]fxols_proceed_clear
*Sep 16 22:45:35.077: htsp_timer_stop2
*Sep 16 22:45:35.077: htsp_timer - 6000 msec

On Wed, Sep 16, 2009 at 6:29 PM, Dane Newman <dane.newman at gmail.com> wrote:

> Hmm I only get this
>
> Cisco2801(config-voiceport)#caller-id ?
>   alerting  Define caller id alerting method
>   enable    Enable caller id on this port
> Cisco2801(config-voiceport)#caller-id al ?
>   ring  during ring
> Cisco2801(config-voiceport)#caller-id al ring ?
>   <1-4>  number of ring on cycles
> Cisco2801(config-voiceport)#caller-id al ring 4 ?
>   <cr>
> Cisco2801(config-voiceport)#caller-id al ring 4
>
> I tried every setting but still no caller id it shows up as unknow what do
> I have to debug to figure this out or anyone have any ideas
>
>   On Wed, Sep 16, 2009 at 4:27 PM, Ratko Dodevski <rade239 at gmail.com>wrote:
>
>> sorry.. it's caller-id alerting pre-ring.... *
>> *
>> *regards
>> *
>>
>> On Wed, Sep 16, 2009 at 10:25 PM, Ratko Dodevski <rade239 at gmail.com>wrote:
>>
>>> GSM adapter is device in whic you put SIM card and I use it for my mobile
>>> calls to go trough that SIM card cos it's cheaper. Also I forgot to mention
>>> that you might need to set caller-id alerting parameters. You can try
>>> several. pre-dial, during dial... pre dial worked for me.
>>> Ratko
>>>
>>>
>>> On Wed, Sep 16, 2009 at 10:01 PM, Dane Newman <dane.newman at gmail.com>wrote:
>>>
>>>>  Thanks man forgive me for asking but what is gsm I connected my fxo
>>>> into my comcast cable modem caller I'd works with a regular phone connected
>>>> in
>>>>
>>>> Sent from my iPhone
>>>>
>>>> On Sep 16, 2009, at 3:37 PM, Ratko Dodevski <rade239 at gmail.com> wrote:
>>>>
>>>>  Hi Dane, I solved my problem... It was the GSM adapter :))) I plugged
>>>> phone with Caller Id and find out that GSM doesn't provide CLID. So I
>>>> connected to the adapter and set it to send CLID.
>>>>
>>>>
>>>> Best Regards
>>>> Ratko
>>>>
>>>> On Wed, Sep 16, 2009 at 6:25 PM, Dane Newman < <dane.newman at gmail.com>
>>>> dane.newman at gmail.com> wrote:
>>>>
>>>>> My full router config is as follows
>>>>>
>>>>> Cisco2801#sh run
>>>>> Building configuration...
>>>>>
>>>>> Current configuration : 9848 bytes
>>>>> !
>>>>> version 12.4
>>>>> service timestamps debug datetime msec
>>>>> service timestamps log datetime localtime
>>>>> service password-encryption
>>>>> !
>>>>> hostname Cisco2801
>>>>> !
>>>>> boot-start-marker
>>>>> boot-end-marker
>>>>> !
>>>>> logging message-counter syslog
>>>>> no logging buffered
>>>>> no logging monitor
>>>>> enable secret 5 $1$Sz.G$hunXhcScXrQkHmAllKj4.0
>>>>> !
>>>>> aaa new-model
>>>>> !
>>>>> !
>>>>> aaa authentication login default local
>>>>> aaa authentication login ezvpnuserauth local
>>>>> aaa authorization exec default local
>>>>> aaa authorization network default local
>>>>> aaa authorization network ezvpngroupauth local
>>>>> !
>>>>> !
>>>>> aaa session-id common
>>>>> errdisable recovery cause bpduguard
>>>>> errdisable recovery interval 400
>>>>> dot11 syslog
>>>>> ip source-route
>>>>> !
>>>>> !
>>>>> !
>>>>> !
>>>>> ip cef
>>>>> no ip domain lookup
>>>>> ip domain name datasc.local
>>>>> ip inspect udp idle-time 1800
>>>>> ip inspect name CBAC tcp
>>>>> ip inspect name CBAC udp
>>>>> ip inspect name CBAC icmp
>>>>> no ipv6 cef
>>>>> ntp server 129.6.15.28
>>>>> !
>>>>> multilink bundle-name authenticated
>>>>> !
>>>>> !
>>>>> !
>>>>> !
>>>>> !
>>>>> !
>>>>> trunk group FXOPORTS
>>>>> !
>>>>> !
>>>>> !
>>>>> voice service pots
>>>>> !
>>>>> voice service voip
>>>>>  fax protocol cisco
>>>>>  h323
>>>>>   no h225 timeout keepalive
>>>>> !
>>>>> !
>>>>> !
>>>>> !
>>>>> !
>>>>> !
>>>>> voice class h323 50
>>>>>   h225 timeout tcp establish 3
>>>>> !
>>>>> !
>>>>> !
>>>>> !
>>>>> !
>>>>> !
>>>>> !
>>>>> !
>>>>> !
>>>>> !
>>>>> !
>>>>> voice-card 0
>>>>>  dsp services dspfarm
>>>>> !
>>>>> !
>>>>> application
>>>>>  global
>>>>>   service alternate default
>>>>>  !
>>>>> !
>>>>> !
>>>>> crypto pki trustpoint TP-self-signed-2766443098
>>>>>  enrollment selfsigned
>>>>>  subject-name cn=IOS-Self-Signed-Certificate-2766443098
>>>>>  revocation-check none
>>>>>  rsakeypair TP-self-signed-2766443098
>>>>> !
>>>>> !
>>>>> crypto pki certificate chain TP-self-signed-2766443098
>>>>>  certificate self-signed 01
>>>>>   3082024E 308201B7 A0030201 02020101 300D0609 2A864886 F70D0101
>>>>> 04050030
>>>>>   31312F30 2D060355 04031326 494F532D 53656C66 2D536967 6E65642D
>>>>> 43657274
>>>>>   69666963 6174652D 32373636 34343330 3938301E 170D3039 30383038
>>>>> 30313537
>>>>>   35305A17 0D323030 31303130 30303030 305A3031 312F302D 06035504
>>>>> 03132649
>>>>>   4F532D53 656C662D 5369676E 65642D43 65727469 66696361 74652D32
>>>>> 37363634
>>>>>   34333039 3830819F 300D0609 2A864886 F70D0101 01050003 818D0030
>>>>> 81890281
>>>>>   8100F024 7897883D 2917DD31 A92AFC92 5FF90B0B 87C59186 1DA717E6
>>>>> 7DC7113F
>>>>>   78FB9546 891FAF14 94296F95 1A269F0A 1945EF5D 02501E85 84CF230A
>>>>> 1945FFD8
>>>>>   6A0952FD 5B97A0B3 CF83D474 59D24A1E 3CDBF52F 1245C023 0905CD43
>>>>> DDCFAE77
>>>>>   56347A58 B91E076E 7C6E39B8 212C15D1 5E6AE9F7 B75E36E5 2EA5EBF6
>>>>> 20888E4C
>>>>>   A78F0203 010001A3 76307430 0F060355 1D130101 FF040530 030101FF
>>>>> 30210603
>>>>>   551D1104 1A301882 16436973 636F3238 30312E64 61746173 632E6C6F
>>>>> 63616C30
>>>>>   1F060355 1D230418 30168014 41650862 0AD93B9A 9639B46B 339E916B
>>>>> A2762CAB
>>>>>   301D0603 551D0E04 16041441 6508620A D93B9A96 39B46B33 9E916BA2
>>>>> 762CAB30
>>>>>   0D06092A 864886F7 0D010104 05000381 8100A84C 200FC75E 17F51DB1
>>>>> 0F14F173
>>>>>   364AE98E 886DE050 8FB015C9 FD057C62 2E01286A 0216D04E 08DB02F8
>>>>> B52B6BB1
>>>>>   2A2710E4 73A8876A 1570E4A9 75A77B33 59B244C8 47AD12C8 7A3441A5
>>>>> EEE48002
>>>>>   20FA0B1F A0B0803D 4FF86CD2 4D69B649 7DD6D151 0EC8A3CF E6B278F5
>>>>> DC40598C
>>>>>   00E4DDC2 58CAD837 9D4C1738 9CA1F850 6F2C
>>>>>         quit
>>>>> !
>>>>> !
>>>>> username ******** privilege 15 secret 5 *********
>>>>> archive
>>>>>  log config
>>>>>   hidekeys
>>>>> !
>>>>> !
>>>>> crypto isakmp policy 20
>>>>>  encr aes 192
>>>>>  authentication pre-share
>>>>>  group 2
>>>>> crypto isakmp key Recoil90 address 0.0.0.0 0.0.0.0
>>>>> crypto isakmp fragmentation
>>>>> !
>>>>> crypto isakmp client configuration group datasc
>>>>>  key Recoil90
>>>>>  dns 10.1.80.2 10.1.80.3
>>>>>  domain datasc.local
>>>>>  pool REMOTEVPNPOOL
>>>>>  acl 150
>>>>> crypto isakmp profile ezvpn
>>>>>    match identity group datasc
>>>>>    client authentication list ezvpnuserauth
>>>>>    isakmp authorization list ezvpngroupauth
>>>>>    client configuration address respond
>>>>> !
>>>>> !
>>>>> crypto ipsec transform-set ezvpntransform esp-aes esp-sha-hmac
>>>>> !
>>>>> crypto dynamic-map dynmap 20
>>>>>  set transform-set ezvpntransform
>>>>>  set isakmp-profile ezvpn
>>>>>  reverse-route
>>>>> !
>>>>> !
>>>>> crypto map dynmap 1 ipsec-isakmp dynamic dynmap
>>>>> !
>>>>> !
>>>>> crypto key pubkey-chain rsa
>>>>>  named-key realm-cisco.pub
>>>>>   key-string
>>>>>    30820122 300D0609 2A864886 F70D0101 01050003 82010F00 3082010A
>>>>> 02820101
>>>>>    00C19E93 A8AF124A D6CC7A24 5097A975 206BE3A2 06FBA13F 6F12CB5B
>>>>> 4E441F16
>>>>>    17E630D5 C02AC252 912BE27F 37FDD9C8 11FC7AF7 DCDD81D9 43CDABC3
>>>>> 6007D128
>>>>>    B199ABCB D34ED0F9 085FADC1 359C189E F30AF10A C0EFB624 7E0764BF
>>>>> 3E53053E
>>>>>    5B2146A9 D7A5EDE3 0298AF03 DED7A5B8 9479039D 20F30663 9AC64B93
>>>>> C0112A35
>>>>>    FE3F0C87 89BCB7BB 994AE74C FA9E481D F65875D6 85EAF974 6D9CC8E3
>>>>> F0B08B85
>>>>>    50437722 FFBE85B9 5E4189FF CC189CB9 69C46F9C A84DFBA5 7A0AF99E
>>>>> AD768C36
>>>>>    006CF498 079F88F8 A3B3FB1F 9FB7B3CB 5539E1D1 9693CCBB 551F78D2
>>>>> 892356AE
>>>>>    2F56D826 8918EF3C 80CA4F4D 87BFCA3B BFF668E9 689782A5 CF31CB6E
>>>>> B4B094D3
>>>>>    F3020301 0001
>>>>>   quit
>>>>> !
>>>>> !
>>>>> !
>>>>> !
>>>>> !
>>>>> !
>>>>> interface FastEthernet0/0
>>>>>  bandwidth 16000
>>>>>  ip address dhcp
>>>>>  ip access-group internet in
>>>>>  no ip redirects
>>>>>  no ip unreachables
>>>>>  no ip proxy-arp
>>>>>  ip nbar protocol-discovery
>>>>>  ip flow ingress
>>>>>  ip flow egress
>>>>>  ip nat outside
>>>>>  ip inspect CBAC out
>>>>>  ip virtual-reassembly
>>>>>  speed 100
>>>>>  full-duplex
>>>>>  crypto map dynmap
>>>>> !
>>>>> interface FastEthernet0/1
>>>>>  ip address 10.1.200.1 255.255.255.252
>>>>>  ip nbar protocol-discovery
>>>>>  ip flow ingress
>>>>>  ip flow egress
>>>>>  ip nat inside
>>>>>  ip virtual-reassembly
>>>>>  duplex auto
>>>>>  speed auto
>>>>>  h323-gateway voip bind srcaddr 10.1.200.1
>>>>> !
>>>>> interface FastEthernet0/1/0
>>>>>  description ConnectionDell2900DMZ
>>>>>  switchport access vlan 150
>>>>>  spanning-tree portfast
>>>>> !
>>>>> interface FastEthernet0/1/1
>>>>>  switchport access vlan 150
>>>>>  spanning-tree portfast
>>>>> !
>>>>> interface FastEthernet0/1/2
>>>>> !
>>>>> interface FastEthernet0/1/3
>>>>> !
>>>>> interface Vlan1
>>>>>  no ip address
>>>>> !
>>>>> interface Vlan150
>>>>>  ip address 10.1.150.1 255.255.255.0
>>>>>  ip nbar protocol-discovery
>>>>>  ip flow ingress
>>>>>  ip flow egress
>>>>>  ip nat inside
>>>>>  ip virtual-reassembly
>>>>> !
>>>>> router eigrp 1
>>>>>  network 10.0.0.0
>>>>>  network 172.16.0.0
>>>>>  no auto-summary
>>>>> !
>>>>> ip local pool REMOTEVPNPOOL 10.250.1.10 10.250.1.150
>>>>> ip forward-protocol nd
>>>>> ip route 0.0.0.0 0.0.0.0 66.56.50.1
>>>>> ip route 96.57.19.26 255.255.255.255 66.56.50.1
>>>>> ip http server
>>>>> ip http authentication local
>>>>> ip http secure-server
>>>>> !
>>>>> ip flow-cache timeout active 1
>>>>> ip flow-export version 5
>>>>> ip flow-export destination 10.1.80.5 9996
>>>>> !
>>>>> ip nat inside source list NATNETWORKS interface FastEthernet0/0
>>>>> overload
>>>>> ip nat inside source static tcp 10.1.150.150 80 interface
>>>>> FastEthernet0/0 8080
>>>>> !
>>>>> ip access-list extended NATNETWORKS
>>>>>  permit ip 10.1.0.0 0.0.255.255 any
>>>>> ip access-list extended internet
>>>>>  permit udp any any eq isakmp
>>>>>  permit tcp any any eq 22
>>>>>  permit udp any eq bootps any eq bootpc
>>>>>  permit icmp any any echo
>>>>>  permit icmp any any echo-reply
>>>>>  permit icmp any any traceroute
>>>>>  permit gre any any
>>>>>  permit esp any any
>>>>>  permit tcp any any eq 5001
>>>>>  permit tcp any any eq www
>>>>>  permit tcp any any eq 8080
>>>>>  permit udp any any eq non500-isakmp
>>>>> !
>>>>> logging trap errors
>>>>> logging source-interface FastEthernet0/1
>>>>> logging 10.1.80.5
>>>>> access-list 150 permit ip 10.1.0.0 0.0.255.255 any
>>>>> !
>>>>> !
>>>>> !
>>>>> !
>>>>> !
>>>>> control-plane
>>>>> !
>>>>> !
>>>>> !
>>>>> voice-port 0/0/0
>>>>>  trunk-group FXOPORTS
>>>>>  echo-cancel coverage 32
>>>>>  timeouts interdigit 7
>>>>>  connection plar opx 102
>>>>>  description 770-892-5514
>>>>>  caller-id enable
>>>>> !
>>>>> voice-port 0/0/1
>>>>>  trunk-group FXOPORTS
>>>>>  echo-cancel coverage 32
>>>>>  timeouts interdigit 7
>>>>>  connection plar opx 102
>>>>>  caller-id enable
>>>>> !
>>>>> !
>>>>> no mgcp timer receive-rtcp
>>>>> mgcp fax t38 ecm
>>>>> mgcp behavior g729-variants static-pt
>>>>> !
>>>>> !
>>>>> dspfarm profile 1 transcode
>>>>>  associate application SCCP
>>>>> !
>>>>> !
>>>>> dial-peer voice 501 pots
>>>>>  trunkgroup FXOPORTS
>>>>>  description Services
>>>>>  destination-pattern [2-8]11
>>>>>  progress_ind setup enable 3
>>>>>  progress_ind progress enable 8
>>>>>  forward-digits all
>>>>> !
>>>>> dial-peer voice 511 pots
>>>>>  trunkgroup FXOPORTS
>>>>>  description local seven digit
>>>>>  destination-pattern [2-9]......
>>>>>  progress_ind setup enable 3
>>>>>  progress_ind progress enable 8
>>>>>  forward-digits all
>>>>> !
>>>>> dial-peer voice 521 pots
>>>>>  trunkgroup FXOPORTS
>>>>>  description local ten digit
>>>>>  destination-pattern 770.......
>>>>>  progress_ind setup enable 3
>>>>>  progress_ind progress enable 8
>>>>>  forward-digits all
>>>>> !
>>>>> dial-peer voice 531 pots
>>>>>  trunkgroup FXOPORTS
>>>>>  description long distance
>>>>>  destination-pattern [2-9]........
>>>>>  progress_ind setup enable 3
>>>>>  progress_ind progress enable 8
>>>>>  forward-digits all
>>>>> !
>>>>> dial-peer voice 571 pots
>>>>>  trunkgroup FXOPORTS
>>>>>  description long distance with one
>>>>>  destination-pattern 1[2-9]........
>>>>>  progress_ind setup enable 3
>>>>>  progress_ind progress enable 8
>>>>>  forward-digits all
>>>>> !
>>>>> dial-peer voice 541 pots
>>>>>  trunkgroup FXOPORTS
>>>>>  description toll free distance
>>>>>  destination-pattern 1[800,866,877,888].......
>>>>>  progress_ind setup enable 3
>>>>>  progress_ind progress enable 8
>>>>>  forward-digits all
>>>>> !
>>>>> dial-peer voice 551 pots
>>>>>  trunkgroup FXOPORTS
>>>>>  description premium distance
>>>>>  destination-pattern 1[900,976].......
>>>>>  progress_ind setup enable 3
>>>>>  progress_ind progress enable 8
>>>>>  forward-digits all
>>>>> !
>>>>> dial-peer voice 561 pots
>>>>>  trunkgroup FXOPORTS
>>>>>  description international
>>>>>  destination-pattern 011...........
>>>>>  progress_ind setup enable 3
>>>>>  progress_ind progress enable 8
>>>>>  forward-digits all
>>>>> !
>>>>> dial-peer voice 911 pots
>>>>>  trunkgroup FXOPORTS
>>>>>  description 911 Call
>>>>>  destination-pattern 911
>>>>>  forward-digits all
>>>>> !
>>>>> dial-peer voice 1000 pots
>>>>>  description incoming Call
>>>>>  preference 1
>>>>>  incoming called-number 7708925414
>>>>>  port 0/0/0
>>>>> !
>>>>> dial-peer voice 1001 pots
>>>>>  description incoming Call backup
>>>>>  preference 2
>>>>>  incoming called-number 7708925413
>>>>>  port 0/0/1
>>>>> !
>>>>> dial-peer voice 100 voip
>>>>>  description 1xx extension to PUBLISHER
>>>>>  preference 1
>>>>>  destination-pattern 1..
>>>>>  progress_ind setup enable 3
>>>>>  progress_ind progress enable 8
>>>>>  voice-class h323 50
>>>>>  session target ipv4:10.1.80.6
>>>>>  dtmf-relay h245-alphanumeric
>>>>>  codec g711ulaw
>>>>>  no vad
>>>>> !
>>>>> dial-peer voice 101 voip
>>>>>  description 1xx extension to subscriber
>>>>>  preference 2
>>>>>  destination-pattern 1..
>>>>>  progress_ind setup enable 3
>>>>>  progress_ind progress enable 8
>>>>>  voice-class h323 50
>>>>>  session target ipv4:10.1.80.7
>>>>>  dtmf-relay h245-alphanumeric
>>>>>  codec g711ulaw
>>>>>  no vad
>>>>> !
>>>>> !
>>>>> !
>>>>> !
>>>>> gatekeeper
>>>>>  shutdown
>>>>> !
>>>>> !
>>>>> line con 0
>>>>> line aux 0
>>>>> line vty 0 4
>>>>>  privilege level 15
>>>>>  transport input ssh
>>>>> line vty 5 15
>>>>>  privilege level 15
>>>>>  transport input ssh
>>>>> !
>>>>> scheduler allocate 20000 1000
>>>>> end
>>>>> Cisco2801#
>>>>> Cisco2801#
>>>>> Cisco2801#
>>>>>
>>>>>   On Wed, Sep 16, 2009 at 12:14 PM, Dane Newman <<dane.newman at gmail.com>
>>>>> dane.newman at gmail.com> wrote:
>>>>>
>>>>>> I have the same issue
>>>>>>
>>>>>> When I call comes into my fxo port I get unknown number  Can anyone
>>>>>> assist with this?  Im using CUCM 7.0 and a 2801 h323 gateway
>>>>>>
>>>>>>
>>>>>> voice-port 0/0/0
>>>>>>  trunk-group FXOPORTS
>>>>>>  echo-cancel coverage 32
>>>>>>  timeouts interdigit 7
>>>>>>  connection plar opx 500
>>>>>>  description ******
>>>>>>  caller-id enable
>>>>>>
>>>>>>   On Tue, Sep 15, 2009 at 4:33 PM, Ratko Dodevski <<rade239 at gmail.com>
>>>>>> rade239 at gmail.com> wrote:
>>>>>>
>>>>>>>  I forgot to mention that i use H323 gateway and CUCM 7
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>> On Tue, Sep 15, 2009 at 9:31 PM, Ratko Dodevski <<rade239 at gmail.com>
>>>>>>> rade239 at gmail.com> wrote:
>>>>>>>
>>>>>>>> Hi, does anyone had already this kind of problem. A have my GSM
>>>>>>>> adapter on plugged into VIC2-2FXO card and all incoming calls are
>>>>>>>> representing as External Dial Unknown Number. Here is my voice-port config
>>>>>>>> and dial-peer. Also, is there a way to use FXS ports instead?
>>>>>>>>
>>>>>>>> voice-port 0/3/0
>>>>>>>>  supervisory disconnect anytone
>>>>>>>>  cptone DE
>>>>>>>>  timeouts call-disconnect 0
>>>>>>>>  timeouts ringing 30
>>>>>>>>  timeouts wait-release 5
>>>>>>>>  connection plar 101
>>>>>>>>  impedance complex2
>>>>>>>>  bearer-cap Speech
>>>>>>>>  caller-id alerting dsp-pre-allocate
>>>>>>>>
>>>>>>>> dial-peer voice 70 pots
>>>>>>>>  destination-pattern 070......
>>>>>>>>  direct-inward-dial
>>>>>>>>  port 0/3/0
>>>>>>>>  prefix 070
>>>>>>>>
>>>>>>>> Any help would be appreciated.
>>>>>>>>
>>>>>>>> Regards
>>>>>>>>
>>>>>>>> --
>>>>>>>> Ratko
>>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>> --
>>>>>>> Ratko
>>>>>>>
>>>>>>> _______________________________________________
>>>>>>> cisco-voip mailing list
>>>>>>> <cisco-voip at puck.nether.net>cisco-voip at puck.nether.net
>>>>>>> <https://puck.nether.net/mailman/listinfo/cisco-voip>
>>>>>>> https://puck.nether.net/mailman/listinfo/cisco-voip
>>>>>>>
>>>>>>>
>>>>>>
>>>>>
>>>>
>>>>
>>>> --
>>>> Ratko
>>>>
>>>>
>>>
>>>
>>> --
>>> Ratko
>>>
>>
>>
>>
>> --
>> Ratko
>>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20090916/1227671b/attachment.html>


More information about the cisco-voip mailing list