[cisco-voip] CallerIP trough FXO port
Dane Newman
dane.newman at gmail.com
Wed Sep 16 18:54:35 EDT 2009
So odd when I plug a regular phone in I get caller id...this is with comcast
voice
On Wed, Sep 16, 2009 at 6:46 PM, Dane Newman <dane.newman at gmail.com> wrote:
> Im getting this on a debug
>
> Cisco2801(config)#logging moni 7
> Cisco2801(config)#exit
> Cisco2801#
> *Sep 16 22:45:08: %SYS-5-CONFIG_I: Configured from console by dnewman on
> vty0 (10.1.150.125)
> Cisco2801#
> Cisco2801#
> *Sep 16 22:45:15.009: htsp_process_event: [0/0/0, FXOLS_ONHOOK,
> E_DSP_SIG_0000]fxols_onhook_ringing
> *Sep 16 22:45:15.009: TGRM: reg_invoke_tgrm_call_update(0, 0, 0, 65535, 1,
> TGRM_CALL_PENDING, TGRM_CALL_VOICE, TGRM_DIRECTION_IN)
> *Sep 16 22:45:15.009: htsp_timer - 125 msec
> *Sep 16 22:45:15.137: htsp_process_event: [0/0/0, FXOLS_WAIT_RING_MIN,
> E_HTSP_EVENT_TIMER]fxols_wait_ring_min_timer
> *Sep 16 22:45:15.137: htsp_timer - 10000 msec
> *Sep 16 22:45:15.137: htsp_timer3 - 5600 msec
> *Sep 16 22:45:15.137: [0/0/0] htsp_start_caller_id_rx:BELLCORE
> *Sep 16 22:45:15.137:
> //-1/313233343930/DSM:(0/0/0):-1/dsp_stream_mgr_create: .
> *Sep 16 22:45:15.137:
> //-1/313233343930/DSM:(0/0/0):-1/set_echo_canceller_data: echo_cancel: 0
> *Sep 16 22:45:15.137:
> //-1/313233343930/DSM:(0/0/0):-1/set_echo_canceller_data: echo_flags: 38,
> echo_len: 256
> *Sep 16 22:45:15.137: htsp_start_caller_id_rx create dsp_stream_manager
> *Sep 16 22:45:15.137:
> //-1/313233343930/DSM:(0/0/0):-1/dsp_stream_mgr_set_dsp_allocated: .
> *Sep 16 22:45:15.137:
> //-1/313233343930/DSM:(0/0/0):-1/dsp_stream_mgr_implement_feature:
> *Sep 16 22:45:15.141: dsp_stream_mgr_implement_feature: feature id = 7
> *Sep 16 22:45:15.145:
> //-1/313233343930/DSM:(0/0/0):-1/dsmp_dsmapi_reserve_resource_cb: .
> *Sep 16 22:45:15.145: [0/0/0] htsp_dsm_create_success returns 1
> *Sep 16 22:45:17.077: htsp_process_event: [0/0/0, FXOLS_RINGING,
> E_DSP_SIG_0100]
> *Sep 16 22:45:17.077: fxols_ringing_not
> *Sep 16 22:45:17.077: htsp_timer_stop
> *Sep 16 22:45:17.077: htsp_timer - 10000 msec
> *Sep 16 22:45:20.737: htsp_process_event: [0/0/0, FXOLS_RINGING,
> E_HTSP_EVENT_TIMER3]fxols_snoop_clid_stop
> *Sep 16 22:45:20.737: htsp_timer_stop3
> *Sep 16 22:45:21.009: htsp_process_event: [0/0/0, FXOLS_RINGING,
> E_DSP_SIG_0000]
> *Sep 16 22:45:23.077: htsp_process_event: [0/0/0, FXOLS_RINGING,
> E_DSP_SIG_0100]
> *Sep 16 22:45:23.077: fxols_ringing_not
> *Sep 16 22:45:23.077: htsp_timer_stop
> *Sep 16 22:45:23.077: htsp_timer_stop3
> *Sep 16 22:45:23.077:
> //-1/313233343930/DSM:(0/0/0):-1/dsp_stream_mgr_destroy: .
> *Sep 16 22:45:23.077:
> //-1/313233343930/DSM:(0/0/0):-1/dsm_delete_all_streams: .
> *Sep 16 22:45:23.081:
> //-1/313233343930/DSM:(0/0/0):-1/dsmapi_accept_modem_passthrough_session: :
> dmgr: 68F25A64, active sessions 0, max sessions: 16 rejected sessions till
> now: 0
> *Sep 16 22:45:23.081: [0/0/0] htsp_stop_caller_id_rx. message length
> 0htsp_setup_ind
> *Sep 16 22:45:23.081: [0/0/0] get_fxo_caller_id:Caller ID receive failed.
> parseCallerIDString:no data.
> *Sep 16 22:45:23.081: [0/0/0] get_local_station_id calling num= calling
> name= calling time=09/16 22:45 orig called=
> *Sep 16 22:45:23.081: TGRM: reg_invoke_tgrm_accept_call(1, TGRM_CALL_VOICE,
> TGRM_DIRECTION_IN, 0, 0, 0, 65535)
> *Sep 16 22:45:23.081: TGRM: Calling vtsp_tsp_call_setup_ind().
> *Sep 16 22:45:23.097: htsp_process_event: [0/0/0, FXOLS_WAIT_SETUP_ACK,
> E_HTSP_SETUP_ACK]
> *Sep 16 22:45:23.097: fxols_wait_setup_ack:
> *Sep 16 22:45:23.097: htsp_timer - 6000 msec
> *Sep 16 22:45:23.125: htsp_process_event: [0/0/0, FXOLS_PROCEEDING,
> E_HTSP_PROCEEDING]fxols_offhook_proc
> *Sep 16 22:45:23.129: flex_dsprm_close_cleanup
> *Sep 16 22:45:23.129:
> //-1/313233343930/DSM:(0/0/0):-1/dsmp_dsmapi_reserve_resource_cb: .
> *Sep 16 22:45:23.129: [0/0/0] htsp_dsm_close_donehtsp_alert_notify
> *Sep 16 22:45:23.157: htsp_process_event: [0/0/0, FXOLS_PROCEEDING,
> E_HTSP_ALERT]fxols_offhook_alerthtsp_call_service_msghtsp_call_service_msg
> not EFXS (2)
> *Sep 16 22:45:27.009: htsp_process_event: [0/0/0, FXOLS_PROCEEDING,
> E_DSP_SIG_0000]fxols_proceed_ring
> *Sep 16 22:45:27.009: htsp_timer_stop
> *Sep 16 22:45:27.009: htsp_timer_stop2
> *Sep 16 22:45:29.077: htsp_process_event: [0/0/0, FXOLS_PROCEEDING,
> E_DSP_SIG_0100]fxols_proceed_clear
> *Sep 16 22:45:29.077: htsp_timer_stop2
> *Sep 16 22:45:29.077: htsp_timer - 6000 msec
> *Sep 16 22:45:33.009: htsp_process_event: [0/0/0, FXOLS_PROCEEDING,
> E_DSP_SIG_0000]fxols_proceed_ring
> *Sep 16 22:45:33.009: htsp_timer_stop
> *Sep 16 22:45:33.009: htsp_timer_stop2
> *Sep 16 22:45:35.077: htsp_process_event: [0/0/0, FXOLS_PROCEEDING,
> E_DSP_SIG_0100]fxols_proceed_clear
> *Sep 16 22:45:35.077: htsp_timer_stop2
> *Sep 16 22:45:35.077: htsp_timer - 6000 msec
>
> On Wed, Sep 16, 2009 at 6:29 PM, Dane Newman <dane.newman at gmail.com>wrote:
>
>> Hmm I only get this
>>
>> Cisco2801(config-voiceport)#caller-id ?
>> alerting Define caller id alerting method
>> enable Enable caller id on this port
>> Cisco2801(config-voiceport)#caller-id al ?
>> ring during ring
>> Cisco2801(config-voiceport)#caller-id al ring ?
>> <1-4> number of ring on cycles
>> Cisco2801(config-voiceport)#caller-id al ring 4 ?
>> <cr>
>> Cisco2801(config-voiceport)#caller-id al ring 4
>>
>> I tried every setting but still no caller id it shows up as unknow what do
>> I have to debug to figure this out or anyone have any ideas
>>
>> On Wed, Sep 16, 2009 at 4:27 PM, Ratko Dodevski <rade239 at gmail.com>wrote:
>>
>>> sorry.. it's caller-id alerting pre-ring.... *
>>> *
>>> *regards
>>> *
>>>
>>> On Wed, Sep 16, 2009 at 10:25 PM, Ratko Dodevski <rade239 at gmail.com>wrote:
>>>
>>>> GSM adapter is device in whic you put SIM card and I use it for my
>>>> mobile calls to go trough that SIM card cos it's cheaper. Also I forgot to
>>>> mention that you might need to set caller-id alerting parameters. You can
>>>> try several. pre-dial, during dial... pre dial worked for me.
>>>> Ratko
>>>>
>>>>
>>>> On Wed, Sep 16, 2009 at 10:01 PM, Dane Newman <dane.newman at gmail.com>wrote:
>>>>
>>>>> Thanks man forgive me for asking but what is gsm I connected my fxo
>>>>> into my comcast cable modem caller I'd works with a regular phone connected
>>>>> in
>>>>>
>>>>> Sent from my iPhone
>>>>>
>>>>> On Sep 16, 2009, at 3:37 PM, Ratko Dodevski <rade239 at gmail.com> wrote:
>>>>>
>>>>> Hi Dane, I solved my problem... It was the GSM adapter :))) I plugged
>>>>> phone with Caller Id and find out that GSM doesn't provide CLID. So I
>>>>> connected to the adapter and set it to send CLID.
>>>>>
>>>>>
>>>>> Best Regards
>>>>> Ratko
>>>>>
>>>>> On Wed, Sep 16, 2009 at 6:25 PM, Dane Newman < <dane.newman at gmail.com>
>>>>> dane.newman at gmail.com> wrote:
>>>>>
>>>>>> My full router config is as follows
>>>>>>
>>>>>> Cisco2801#sh run
>>>>>> Building configuration...
>>>>>>
>>>>>> Current configuration : 9848 bytes
>>>>>> !
>>>>>> version 12.4
>>>>>> service timestamps debug datetime msec
>>>>>> service timestamps log datetime localtime
>>>>>> service password-encryption
>>>>>> !
>>>>>> hostname Cisco2801
>>>>>> !
>>>>>> boot-start-marker
>>>>>> boot-end-marker
>>>>>> !
>>>>>> logging message-counter syslog
>>>>>> no logging buffered
>>>>>> no logging monitor
>>>>>> enable secret 5 $1$Sz.G$hunXhcScXrQkHmAllKj4.0
>>>>>> !
>>>>>> aaa new-model
>>>>>> !
>>>>>> !
>>>>>> aaa authentication login default local
>>>>>> aaa authentication login ezvpnuserauth local
>>>>>> aaa authorization exec default local
>>>>>> aaa authorization network default local
>>>>>> aaa authorization network ezvpngroupauth local
>>>>>> !
>>>>>> !
>>>>>> aaa session-id common
>>>>>> errdisable recovery cause bpduguard
>>>>>> errdisable recovery interval 400
>>>>>> dot11 syslog
>>>>>> ip source-route
>>>>>> !
>>>>>> !
>>>>>> !
>>>>>> !
>>>>>> ip cef
>>>>>> no ip domain lookup
>>>>>> ip domain name datasc.local
>>>>>> ip inspect udp idle-time 1800
>>>>>> ip inspect name CBAC tcp
>>>>>> ip inspect name CBAC udp
>>>>>> ip inspect name CBAC icmp
>>>>>> no ipv6 cef
>>>>>> ntp server 129.6.15.28
>>>>>> !
>>>>>> multilink bundle-name authenticated
>>>>>> !
>>>>>> !
>>>>>> !
>>>>>> !
>>>>>> !
>>>>>> !
>>>>>> trunk group FXOPORTS
>>>>>> !
>>>>>> !
>>>>>> !
>>>>>> voice service pots
>>>>>> !
>>>>>> voice service voip
>>>>>> fax protocol cisco
>>>>>> h323
>>>>>> no h225 timeout keepalive
>>>>>> !
>>>>>> !
>>>>>> !
>>>>>> !
>>>>>> !
>>>>>> !
>>>>>> voice class h323 50
>>>>>> h225 timeout tcp establish 3
>>>>>> !
>>>>>> !
>>>>>> !
>>>>>> !
>>>>>> !
>>>>>> !
>>>>>> !
>>>>>> !
>>>>>> !
>>>>>> !
>>>>>> !
>>>>>> voice-card 0
>>>>>> dsp services dspfarm
>>>>>> !
>>>>>> !
>>>>>> application
>>>>>> global
>>>>>> service alternate default
>>>>>> !
>>>>>> !
>>>>>> !
>>>>>> crypto pki trustpoint TP-self-signed-2766443098
>>>>>> enrollment selfsigned
>>>>>> subject-name cn=IOS-Self-Signed-Certificate-2766443098
>>>>>> revocation-check none
>>>>>> rsakeypair TP-self-signed-2766443098
>>>>>> !
>>>>>> !
>>>>>> crypto pki certificate chain TP-self-signed-2766443098
>>>>>> certificate self-signed 01
>>>>>> 3082024E 308201B7 A0030201 02020101 300D0609 2A864886 F70D0101
>>>>>> 04050030
>>>>>> 31312F30 2D060355 04031326 494F532D 53656C66 2D536967 6E65642D
>>>>>> 43657274
>>>>>> 69666963 6174652D 32373636 34343330 3938301E 170D3039 30383038
>>>>>> 30313537
>>>>>> 35305A17 0D323030 31303130 30303030 305A3031 312F302D 06035504
>>>>>> 03132649
>>>>>> 4F532D53 656C662D 5369676E 65642D43 65727469 66696361 74652D32
>>>>>> 37363634
>>>>>> 34333039 3830819F 300D0609 2A864886 F70D0101 01050003 818D0030
>>>>>> 81890281
>>>>>> 8100F024 7897883D 2917DD31 A92AFC92 5FF90B0B 87C59186 1DA717E6
>>>>>> 7DC7113F
>>>>>> 78FB9546 891FAF14 94296F95 1A269F0A 1945EF5D 02501E85 84CF230A
>>>>>> 1945FFD8
>>>>>> 6A0952FD 5B97A0B3 CF83D474 59D24A1E 3CDBF52F 1245C023 0905CD43
>>>>>> DDCFAE77
>>>>>> 56347A58 B91E076E 7C6E39B8 212C15D1 5E6AE9F7 B75E36E5 2EA5EBF6
>>>>>> 20888E4C
>>>>>> A78F0203 010001A3 76307430 0F060355 1D130101 FF040530 030101FF
>>>>>> 30210603
>>>>>> 551D1104 1A301882 16436973 636F3238 30312E64 61746173 632E6C6F
>>>>>> 63616C30
>>>>>> 1F060355 1D230418 30168014 41650862 0AD93B9A 9639B46B 339E916B
>>>>>> A2762CAB
>>>>>> 301D0603 551D0E04 16041441 6508620A D93B9A96 39B46B33 9E916BA2
>>>>>> 762CAB30
>>>>>> 0D06092A 864886F7 0D010104 05000381 8100A84C 200FC75E 17F51DB1
>>>>>> 0F14F173
>>>>>> 364AE98E 886DE050 8FB015C9 FD057C62 2E01286A 0216D04E 08DB02F8
>>>>>> B52B6BB1
>>>>>> 2A2710E4 73A8876A 1570E4A9 75A77B33 59B244C8 47AD12C8 7A3441A5
>>>>>> EEE48002
>>>>>> 20FA0B1F A0B0803D 4FF86CD2 4D69B649 7DD6D151 0EC8A3CF E6B278F5
>>>>>> DC40598C
>>>>>> 00E4DDC2 58CAD837 9D4C1738 9CA1F850 6F2C
>>>>>> quit
>>>>>> !
>>>>>> !
>>>>>> username ******** privilege 15 secret 5 *********
>>>>>> archive
>>>>>> log config
>>>>>> hidekeys
>>>>>> !
>>>>>> !
>>>>>> crypto isakmp policy 20
>>>>>> encr aes 192
>>>>>> authentication pre-share
>>>>>> group 2
>>>>>> crypto isakmp key Recoil90 address 0.0.0.0 0.0.0.0
>>>>>> crypto isakmp fragmentation
>>>>>> !
>>>>>> crypto isakmp client configuration group datasc
>>>>>> key Recoil90
>>>>>> dns 10.1.80.2 10.1.80.3
>>>>>> domain datasc.local
>>>>>> pool REMOTEVPNPOOL
>>>>>> acl 150
>>>>>> crypto isakmp profile ezvpn
>>>>>> match identity group datasc
>>>>>> client authentication list ezvpnuserauth
>>>>>> isakmp authorization list ezvpngroupauth
>>>>>> client configuration address respond
>>>>>> !
>>>>>> !
>>>>>> crypto ipsec transform-set ezvpntransform esp-aes esp-sha-hmac
>>>>>> !
>>>>>> crypto dynamic-map dynmap 20
>>>>>> set transform-set ezvpntransform
>>>>>> set isakmp-profile ezvpn
>>>>>> reverse-route
>>>>>> !
>>>>>> !
>>>>>> crypto map dynmap 1 ipsec-isakmp dynamic dynmap
>>>>>> !
>>>>>> !
>>>>>> crypto key pubkey-chain rsa
>>>>>> named-key realm-cisco.pub
>>>>>> key-string
>>>>>> 30820122 300D0609 2A864886 F70D0101 01050003 82010F00 3082010A
>>>>>> 02820101
>>>>>> 00C19E93 A8AF124A D6CC7A24 5097A975 206BE3A2 06FBA13F 6F12CB5B
>>>>>> 4E441F16
>>>>>> 17E630D5 C02AC252 912BE27F 37FDD9C8 11FC7AF7 DCDD81D9 43CDABC3
>>>>>> 6007D128
>>>>>> B199ABCB D34ED0F9 085FADC1 359C189E F30AF10A C0EFB624 7E0764BF
>>>>>> 3E53053E
>>>>>> 5B2146A9 D7A5EDE3 0298AF03 DED7A5B8 9479039D 20F30663 9AC64B93
>>>>>> C0112A35
>>>>>> FE3F0C87 89BCB7BB 994AE74C FA9E481D F65875D6 85EAF974 6D9CC8E3
>>>>>> F0B08B85
>>>>>> 50437722 FFBE85B9 5E4189FF CC189CB9 69C46F9C A84DFBA5 7A0AF99E
>>>>>> AD768C36
>>>>>> 006CF498 079F88F8 A3B3FB1F 9FB7B3CB 5539E1D1 9693CCBB 551F78D2
>>>>>> 892356AE
>>>>>> 2F56D826 8918EF3C 80CA4F4D 87BFCA3B BFF668E9 689782A5 CF31CB6E
>>>>>> B4B094D3
>>>>>> F3020301 0001
>>>>>> quit
>>>>>> !
>>>>>> !
>>>>>> !
>>>>>> !
>>>>>> !
>>>>>> !
>>>>>> interface FastEthernet0/0
>>>>>> bandwidth 16000
>>>>>> ip address dhcp
>>>>>> ip access-group internet in
>>>>>> no ip redirects
>>>>>> no ip unreachables
>>>>>> no ip proxy-arp
>>>>>> ip nbar protocol-discovery
>>>>>> ip flow ingress
>>>>>> ip flow egress
>>>>>> ip nat outside
>>>>>> ip inspect CBAC out
>>>>>> ip virtual-reassembly
>>>>>> speed 100
>>>>>> full-duplex
>>>>>> crypto map dynmap
>>>>>> !
>>>>>> interface FastEthernet0/1
>>>>>> ip address 10.1.200.1 255.255.255.252
>>>>>> ip nbar protocol-discovery
>>>>>> ip flow ingress
>>>>>> ip flow egress
>>>>>> ip nat inside
>>>>>> ip virtual-reassembly
>>>>>> duplex auto
>>>>>> speed auto
>>>>>> h323-gateway voip bind srcaddr 10.1.200.1
>>>>>> !
>>>>>> interface FastEthernet0/1/0
>>>>>> description ConnectionDell2900DMZ
>>>>>> switchport access vlan 150
>>>>>> spanning-tree portfast
>>>>>> !
>>>>>> interface FastEthernet0/1/1
>>>>>> switchport access vlan 150
>>>>>> spanning-tree portfast
>>>>>> !
>>>>>> interface FastEthernet0/1/2
>>>>>> !
>>>>>> interface FastEthernet0/1/3
>>>>>> !
>>>>>> interface Vlan1
>>>>>> no ip address
>>>>>> !
>>>>>> interface Vlan150
>>>>>> ip address 10.1.150.1 255.255.255.0
>>>>>> ip nbar protocol-discovery
>>>>>> ip flow ingress
>>>>>> ip flow egress
>>>>>> ip nat inside
>>>>>> ip virtual-reassembly
>>>>>> !
>>>>>> router eigrp 1
>>>>>> network 10.0.0.0
>>>>>> network 172.16.0.0
>>>>>> no auto-summary
>>>>>> !
>>>>>> ip local pool REMOTEVPNPOOL 10.250.1.10 10.250.1.150
>>>>>> ip forward-protocol nd
>>>>>> ip route 0.0.0.0 0.0.0.0 66.56.50.1
>>>>>> ip route 96.57.19.26 255.255.255.255 66.56.50.1
>>>>>> ip http server
>>>>>> ip http authentication local
>>>>>> ip http secure-server
>>>>>> !
>>>>>> ip flow-cache timeout active 1
>>>>>> ip flow-export version 5
>>>>>> ip flow-export destination 10.1.80.5 9996
>>>>>> !
>>>>>> ip nat inside source list NATNETWORKS interface FastEthernet0/0
>>>>>> overload
>>>>>> ip nat inside source static tcp 10.1.150.150 80 interface
>>>>>> FastEthernet0/0 8080
>>>>>> !
>>>>>> ip access-list extended NATNETWORKS
>>>>>> permit ip 10.1.0.0 0.0.255.255 any
>>>>>> ip access-list extended internet
>>>>>> permit udp any any eq isakmp
>>>>>> permit tcp any any eq 22
>>>>>> permit udp any eq bootps any eq bootpc
>>>>>> permit icmp any any echo
>>>>>> permit icmp any any echo-reply
>>>>>> permit icmp any any traceroute
>>>>>> permit gre any any
>>>>>> permit esp any any
>>>>>> permit tcp any any eq 5001
>>>>>> permit tcp any any eq www
>>>>>> permit tcp any any eq 8080
>>>>>> permit udp any any eq non500-isakmp
>>>>>> !
>>>>>> logging trap errors
>>>>>> logging source-interface FastEthernet0/1
>>>>>> logging 10.1.80.5
>>>>>> access-list 150 permit ip 10.1.0.0 0.0.255.255 any
>>>>>> !
>>>>>> !
>>>>>> !
>>>>>> !
>>>>>> !
>>>>>> control-plane
>>>>>> !
>>>>>> !
>>>>>> !
>>>>>> voice-port 0/0/0
>>>>>> trunk-group FXOPORTS
>>>>>> echo-cancel coverage 32
>>>>>> timeouts interdigit 7
>>>>>> connection plar opx 102
>>>>>> description 770-892-5514
>>>>>> caller-id enable
>>>>>> !
>>>>>> voice-port 0/0/1
>>>>>> trunk-group FXOPORTS
>>>>>> echo-cancel coverage 32
>>>>>> timeouts interdigit 7
>>>>>> connection plar opx 102
>>>>>> caller-id enable
>>>>>> !
>>>>>> !
>>>>>> no mgcp timer receive-rtcp
>>>>>> mgcp fax t38 ecm
>>>>>> mgcp behavior g729-variants static-pt
>>>>>> !
>>>>>> !
>>>>>> dspfarm profile 1 transcode
>>>>>> associate application SCCP
>>>>>> !
>>>>>> !
>>>>>> dial-peer voice 501 pots
>>>>>> trunkgroup FXOPORTS
>>>>>> description Services
>>>>>> destination-pattern [2-8]11
>>>>>> progress_ind setup enable 3
>>>>>> progress_ind progress enable 8
>>>>>> forward-digits all
>>>>>> !
>>>>>> dial-peer voice 511 pots
>>>>>> trunkgroup FXOPORTS
>>>>>> description local seven digit
>>>>>> destination-pattern [2-9]......
>>>>>> progress_ind setup enable 3
>>>>>> progress_ind progress enable 8
>>>>>> forward-digits all
>>>>>> !
>>>>>> dial-peer voice 521 pots
>>>>>> trunkgroup FXOPORTS
>>>>>> description local ten digit
>>>>>> destination-pattern 770.......
>>>>>> progress_ind setup enable 3
>>>>>> progress_ind progress enable 8
>>>>>> forward-digits all
>>>>>> !
>>>>>> dial-peer voice 531 pots
>>>>>> trunkgroup FXOPORTS
>>>>>> description long distance
>>>>>> destination-pattern [2-9]........
>>>>>> progress_ind setup enable 3
>>>>>> progress_ind progress enable 8
>>>>>> forward-digits all
>>>>>> !
>>>>>> dial-peer voice 571 pots
>>>>>> trunkgroup FXOPORTS
>>>>>> description long distance with one
>>>>>> destination-pattern 1[2-9]........
>>>>>> progress_ind setup enable 3
>>>>>> progress_ind progress enable 8
>>>>>> forward-digits all
>>>>>> !
>>>>>> dial-peer voice 541 pots
>>>>>> trunkgroup FXOPORTS
>>>>>> description toll free distance
>>>>>> destination-pattern 1[800,866,877,888].......
>>>>>> progress_ind setup enable 3
>>>>>> progress_ind progress enable 8
>>>>>> forward-digits all
>>>>>> !
>>>>>> dial-peer voice 551 pots
>>>>>> trunkgroup FXOPORTS
>>>>>> description premium distance
>>>>>> destination-pattern 1[900,976].......
>>>>>> progress_ind setup enable 3
>>>>>> progress_ind progress enable 8
>>>>>> forward-digits all
>>>>>> !
>>>>>> dial-peer voice 561 pots
>>>>>> trunkgroup FXOPORTS
>>>>>> description international
>>>>>> destination-pattern 011...........
>>>>>> progress_ind setup enable 3
>>>>>> progress_ind progress enable 8
>>>>>> forward-digits all
>>>>>> !
>>>>>> dial-peer voice 911 pots
>>>>>> trunkgroup FXOPORTS
>>>>>> description 911 Call
>>>>>> destination-pattern 911
>>>>>> forward-digits all
>>>>>> !
>>>>>> dial-peer voice 1000 pots
>>>>>> description incoming Call
>>>>>> preference 1
>>>>>> incoming called-number 7708925414
>>>>>> port 0/0/0
>>>>>> !
>>>>>> dial-peer voice 1001 pots
>>>>>> description incoming Call backup
>>>>>> preference 2
>>>>>> incoming called-number 7708925413
>>>>>> port 0/0/1
>>>>>> !
>>>>>> dial-peer voice 100 voip
>>>>>> description 1xx extension to PUBLISHER
>>>>>> preference 1
>>>>>> destination-pattern 1..
>>>>>> progress_ind setup enable 3
>>>>>> progress_ind progress enable 8
>>>>>> voice-class h323 50
>>>>>> session target ipv4:10.1.80.6
>>>>>> dtmf-relay h245-alphanumeric
>>>>>> codec g711ulaw
>>>>>> no vad
>>>>>> !
>>>>>> dial-peer voice 101 voip
>>>>>> description 1xx extension to subscriber
>>>>>> preference 2
>>>>>> destination-pattern 1..
>>>>>> progress_ind setup enable 3
>>>>>> progress_ind progress enable 8
>>>>>> voice-class h323 50
>>>>>> session target ipv4:10.1.80.7
>>>>>> dtmf-relay h245-alphanumeric
>>>>>> codec g711ulaw
>>>>>> no vad
>>>>>> !
>>>>>> !
>>>>>> !
>>>>>> !
>>>>>> gatekeeper
>>>>>> shutdown
>>>>>> !
>>>>>> !
>>>>>> line con 0
>>>>>> line aux 0
>>>>>> line vty 0 4
>>>>>> privilege level 15
>>>>>> transport input ssh
>>>>>> line vty 5 15
>>>>>> privilege level 15
>>>>>> transport input ssh
>>>>>> !
>>>>>> scheduler allocate 20000 1000
>>>>>> end
>>>>>> Cisco2801#
>>>>>> Cisco2801#
>>>>>> Cisco2801#
>>>>>>
>>>>>> On Wed, Sep 16, 2009 at 12:14 PM, Dane Newman <<dane.newman at gmail.com>
>>>>>> dane.newman at gmail.com> wrote:
>>>>>>
>>>>>>> I have the same issue
>>>>>>>
>>>>>>> When I call comes into my fxo port I get unknown number Can anyone
>>>>>>> assist with this? Im using CUCM 7.0 and a 2801 h323 gateway
>>>>>>>
>>>>>>>
>>>>>>> voice-port 0/0/0
>>>>>>> trunk-group FXOPORTS
>>>>>>> echo-cancel coverage 32
>>>>>>> timeouts interdigit 7
>>>>>>> connection plar opx 500
>>>>>>> description ******
>>>>>>> caller-id enable
>>>>>>>
>>>>>>> On Tue, Sep 15, 2009 at 4:33 PM, Ratko Dodevski <<rade239 at gmail.com>
>>>>>>> rade239 at gmail.com> wrote:
>>>>>>>
>>>>>>>> I forgot to mention that i use H323 gateway and CUCM 7
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>> On Tue, Sep 15, 2009 at 9:31 PM, Ratko Dodevski <<rade239 at gmail.com>
>>>>>>>> rade239 at gmail.com> wrote:
>>>>>>>>
>>>>>>>>> Hi, does anyone had already this kind of problem. A have my GSM
>>>>>>>>> adapter on plugged into VIC2-2FXO card and all incoming calls are
>>>>>>>>> representing as External Dial Unknown Number. Here is my voice-port config
>>>>>>>>> and dial-peer. Also, is there a way to use FXS ports instead?
>>>>>>>>>
>>>>>>>>> voice-port 0/3/0
>>>>>>>>> supervisory disconnect anytone
>>>>>>>>> cptone DE
>>>>>>>>> timeouts call-disconnect 0
>>>>>>>>> timeouts ringing 30
>>>>>>>>> timeouts wait-release 5
>>>>>>>>> connection plar 101
>>>>>>>>> impedance complex2
>>>>>>>>> bearer-cap Speech
>>>>>>>>> caller-id alerting dsp-pre-allocate
>>>>>>>>>
>>>>>>>>> dial-peer voice 70 pots
>>>>>>>>> destination-pattern 070......
>>>>>>>>> direct-inward-dial
>>>>>>>>> port 0/3/0
>>>>>>>>> prefix 070
>>>>>>>>>
>>>>>>>>> Any help would be appreciated.
>>>>>>>>>
>>>>>>>>> Regards
>>>>>>>>>
>>>>>>>>> --
>>>>>>>>> Ratko
>>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>> --
>>>>>>>> Ratko
>>>>>>>>
>>>>>>>> _______________________________________________
>>>>>>>> cisco-voip mailing list
>>>>>>>> <cisco-voip at puck.nether.net>cisco-voip at puck.nether.net
>>>>>>>> <https://puck.nether.net/mailman/listinfo/cisco-voip>
>>>>>>>> https://puck.nether.net/mailman/listinfo/cisco-voip
>>>>>>>>
>>>>>>>>
>>>>>>>
>>>>>>
>>>>>
>>>>>
>>>>> --
>>>>> Ratko
>>>>>
>>>>>
>>>>
>>>>
>>>> --
>>>> Ratko
>>>>
>>>
>>>
>>>
>>> --
>>> Ratko
>>>
>>
>>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20090916/247fa73e/attachment.html>
More information about the cisco-voip
mailing list