[cisco-voip] 7911 SCCP shows unprovisioned

[Mathew Miller]

http://www.cisco.com/en/US/products/hw/phones/ps379/products_tech_note09186a0080094584.shtml

On Sep 17, 2009, at 12:57 AM, Jason Aarons (US) wrote:

> Running CallManager 7.1(2) I had our staging group put loads on 7911s.
>
> Onsite I plug the phones in and see Unprovisied.  Like they are  
> trying to use SIP!?!
>
> We are all SCCP, the phones are in CallManager correctly.
>
> Any ideas?  If they do have SIP loads on them how do I convert them  
> back to SCCP?
>
>
>
> Disclaimer: This e-mail communication and any attachments may  
> contain confidential and privileged information and is for use by  
> the designated addressee(s) named above only. If you are not the  
> intended addressee, you are hereby notified that you have received  
> this communication in error and that any use or reproduction of this  
> email or its contents is strictly prohibited and may be unlawful. If  
> you have received this communication in error, please notify us  
> immediately by replying to this message and deleting it from your  
> computer. Thank you.
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20090917/4d87dbde/attachment.html>