[cisco-voip] Phone proxy -- CM

Chris Ward (chrward) chrward at cisco.com
Fri Sep 18 13:13:47 EDT 2009


I haven't heard anything like that. I would suspect it's going to be an
ASA-only thing, but then again, I am not a firewall/FWSM guy. 

 

-Chris

 

From: Scott Voll [mailto:svoll.voip at gmail.com] 
Sent: Friday, September 18, 2009 12:14 PM
To: Chris Ward (chrward)
Cc: cisco-voip at puck.nether.net
Subject: Re: [cisco-voip] Phone proxy -- CM

 

any idea if the FWSM supports or is going to support in the near future
the Phone proxy feature?

 

Scott

On Fri, Sep 18, 2009 at 8:03 AM, Chris Ward (chrward)
<chrward at cisco.com> wrote:

It's TAC supported, but only on what is currently documented (versions,
features, etc...). However, there is no sustainment.

 

Not a good situation, I agree. 

 

-Chris

 

From: Scott Voll [mailto:svoll.voip at gmail.com] 

Sent: Friday, September 18, 2009 10:49 AM
To: Chris Ward (chrward)

Cc: cisco-voip at puck.nether.net
Subject: Re: [cisco-voip] Phone proxy -- CM

 

what's up with that.... I knew they EoS it about 6 months after it came
out..... but isn't there support for like 3 or 4 years after, before
they stop supporting it?

 

Scott

On Fri, Sep 18, 2009 at 6:22 AM, Chris Ward (chrward)
<chrward at cisco.com> wrote:

Hi Scott,

 

Phoneproxy(Standalone) has been deprecated and is EOL. It has been
replaced by Phoneproxy(ASA).

 

If it works with 7.1 then that's fine, if it doesn't, you are on your
own. I suspect there might be some issues since we made a jump in SCCP
versions to support IPv6 in 7.1.

 

You may need to investigate getting an ASA or adding the feature to an
ASA you already own as the original Phoneproxy isn't developed anymore.
Sorry for the bad news. But hey, it's Friday right?

 

-Chris

 

From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Scott Voll
Sent: Thursday, September 17, 2009 6:48 PM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] Phone proxy -- CM

 

I have the Phone proxy appliance and CM 6.1.2 setup and working.

 

I'm looking to upgrade to CM 7.1.  But I can't find in any of the
documentation if it's supported and if I need to upgrade to 1.0.4 to get
it supported.  Any idea where I can find that kind of info?

 

I've looked through the PP release notes and admin guide with no
success.

 

Thanks

 

Scott

 

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20090918/9820741d/attachment.html>


More information about the cisco-voip mailing list