[cisco-voip] Non-digit destinations in SIP trunks

[Bill Simon]

OpenSER with all users set up by alphanumeric usernames.

Just say for the purpose of this discussion that this system at the 
remote end of the trunk cannot be modified.  It (only) accepts calls 
addressed to username at example.com as a SIP URI.

 From my research and the discussion so far we can send to @example.com 
(using SIP Route Pattern by domain, setting up a SIP trunk, etc.)

The sticky part is being able to send to the "username" part of the URI.

If the remote end were configured with a numeric dialplan it could be 
1234 at example.com and I believe it is simple to do that in CUCM.

Matt Slaga (US) wrote:
> What is the integration you are looking to make work?
> 
> -----Original Message-----
> From: cisco-voip-bounces at puck.nether.net [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Bill Simon
> Sent: Tuesday, September 22, 2009 11:06 AM
> To: Philip Walenta
> Cc: 'Cisco Voip'
> Subject: Re: [cisco-voip] Non-digit destinations in SIP trunks
> 
> Correct--and yes it is available in 6--but as far as I can tell it does 
> not handle anything related to the username (the part before the @ sign 
> in a SIP URI).  It seems like it's so close but there's no way to 
> specify an alpha username.
> 
> Philip Walenta wrote:
>> Not sure if this is available in 6, but under "Call Routing" there's a "SIP
>> route pattern" that appears to cover domain/IP address routing.
>>
>> -----Original Message-----
>> From: cisco-voip-bounces at puck.nether.net
>> [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Bill Simon
>> Sent: Tuesday, September 22, 2009 9:29 AM
>> To: Cisco Voip
>> Subject: [cisco-voip] Non-digit destinations in SIP trunks
>>
>> CUCM 6.1.3
>>
>> Remote end of a SIP trunk only has alphanumeric destinations.  E.g. 
>> "jdoe2".  Any idea how to route calls to those users from CUCM?  Can't
>> specify alpha characters in any route pattern, call forwarding, etc.