[cisco-voip] superG3 support?

[Ed Leatherman]

Sounds like the fax relay will work with super G3 faxing in that IOS (the
handshaking portion which is different than G3), but the transmission speeds
will only be negotiated at normal G3 speeds. I havent read the document, not
sure if "SG3 fax is natively supported" means that SG3 speeds will be
supported in that version or not.


On Wed, Sep 23, 2009 at 10:15 AM, Lelio Fulgenzi <lelio at uoguelph.ca> wrote:

> am I reading this right? it sounds like SG3 speeds are supported now?
>
> http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/srnd/7x/uc7xsrnd.pdf(page 188)
>
> ------------------------------
> Super-Group 3 Fax Support
>
> Cisco IOS gateways with Cisco IOS Release 12.4.4T support Super-Group 3
> (SG3) fax; however, only
> Group 3 speeds are negotiated. Beginning with Cisco IOS Release 15.0.1M,
> SG3 fax is supported
> natively. For more information on this feature, refer to Fax Relay Support
> for SG3 Fax Machines at G3
> Speeds, available at
>
>
> http://www.cisco.com/en/US/products/ps6441/products_feature_guide09186a00805138e5.html
>
> If it is necessary to transport SG3 high-speed faxes at their native
> speeds, then modem passthrough must
> be used.
> ------------------------------
>
>
>
> ---
> Lelio Fulgenzi, B.A.
> Senior Analyst (CCS) * University of Guelph * Guelph, Ontario N1G 2W1
> (519) 824-4120 x56354 (519) 767-1060 FAX (JNHN)
> ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
> "Bad grammar makes me [sic]" - Tshirt
>
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>


-- 
Ed Leatherman
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20090923/49408c39/attachment.html>