[cisco-voip] superG3 support?

[Nick Matthews]

I know this is something on the roadmap, just not sure when they're
planning on announcing it.  But yes, this is coming.


-nick

On Wed, Sep 23, 2009 at 10:15 AM, Lelio Fulgenzi <lelio at uoguelph.ca> wrote:
> am I reading this right? it sounds like SG3 speeds are supported now?
>
> http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/srnd/7x/uc7xsrnd.pdf
> (page 188)
>
> ________________________________
> Super-Group 3 Fax Support
>
> Cisco IOS gateways with Cisco IOS Release 12.4.4T support Super-Group 3
> (SG3) fax; however, only
> Group 3 speeds are negotiated. Beginning with Cisco IOS Release 15.0.1M, SG3
> fax is supported
> natively. For more information on this feature, refer to Fax Relay Support
> for SG3 Fax Machines at G3
> Speeds, available at
>
> http://www.cisco.com/en/US/products/ps6441/products_feature_guide09186a00805138e5.html
>
> If it is necessary to transport SG3 high-speed faxes at their native speeds,
> then modem passthrough must
> be used.
> ________________________________
>
>
> ---
> Lelio Fulgenzi, B.A.
> Senior Analyst (CCS) * University of Guelph * Guelph, Ontario N1G 2W1
> (519) 824-4120 x56354 (519) 767-1060 FAX (JNHN)
> ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
> "Bad grammar makes me [sic]" - Tshirt
>
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>