[cisco-voip] VG 248's

[Wes Sisk]

Wow, interesting behavior.  Looked around a bit.  Most cases appear to 
result in replacing the unit.

/Wes

On Friday, September 25, 2009 10:33:54 AM, Melvin Fong 
<mfong at pacific.edu> wrote:
>
> We recently had 3 vg248's change from full duplex to half, we reset 
> the settings and they connect at full, but go back to half after a 
> period of time,  we rebooted them and everything appears to be stable 
> at this time.  Environment checks out ok as I understand that a faulty 
> power supply could cause this.  Any other ideas?
>
> Thanks for all suggestions!  Mel
>
> ------------------------------------------------------------------------
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>   

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20090925/2644c411/attachment.html>