[cisco-voip] Installing CUCM 5.1 on Dell Optiplex

[lelio at uoguelph.ca]

Tim,

CUCM requires specific hardware. Check out www.cisco.com/go/swonly for  
supported hardware configurations.

Lelio Fulgenzi, Senior Analyst
Computing & Communications
University of Guelph
519-824-4120 x56354

...sent from my iPod - please pardon my fat fingers ;)

[XKJ2000]

On 2009-09-28, at 6:26 AM, Timothy Smith <timotsmith at gmail.com> wrote:

> Dear Colleagues,
>
> I had a problem with our call manager and was advised its a hardware
> problem. We've now bought a Dell Optiplex 760 series server to have
> the call manager 5.1.2 installed but am having issues.
>
> After anaconda (the redhat linux installer) has started and gone
> through most of the steps, it can not detect the DVD Drive..hence
> installation can't continue. This is a common problem with linux
> distros installing on these machines but many times, the solution is
> disabling/modifying some boot options when the kernel is loading.
> Problem here is that I cant modify anything in the boot loader or give
> it some arguments.
>
> Has anyone faced a similar situation and found a solution?
>
> I appreciate your assistance.
>
> Kind regards,
> Tim
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip