[cisco-voip] Registering Phones

[Ryan Ratliff]

You can specify a load server in CCMAdmin for the phone(s).  They will use DHCP option 150 for TFTP but when pulling firmware files will try to get it from that server.  

That and peer-firmware sharing should help out a lot.

-Ryan

On Apr 1, 2010, at 1:34 PM, H, Tim wrote:

Is there a way to tell the status of a phone from a remote site?  I have phones setup to DHCP and auto-register to the CUCM.  The problem is, they’ll be downloading different firmware and probably take quite a while to load up.  I need to know if the phones actually are downloading the firmware or not.  Any idea on how to tell this?
 
Is there a way to put the firmware config on the local VGW to pull from it?
 
Thanks,
 
Tim
 
_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20100401/6bcedac5/attachment.html>