[cisco-voip] Registering Phones

[H, Tim]

Is there a way to tell the status of a phone from a remote site?  I have phones setup to DHCP and auto-register to the CUCM.  The problem is, they'll be downloading different firmware and probably take quite a while to load up.  I need to know if the phones actually are downloading the firmware or not.  Any idea on how to tell this?

Is there a way to put the firmware config on the local VGW to pull from it?

Thanks,

Tim

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20100401/b764e34e/attachment.html>