[cisco-voip] Registering Phones

[Jason Aarons (US)]

So are we downloading a 6MB of .sbn phone loads then determining the phone on L2 same subnet had the image? Will the phone get a very small config file and download the a nearby peer firmware phone?  I've been wanting to wireshark a new 7.1.3b install and see what the traffic looks like with peer firmware sharing.  I think Wes mentioned some other bugs that indicate Peer Firmware Sharing isn't fully baked yet for out of box, but more for already in place upgrades going forward.

http://markmail.org/message/6kwy3gtg5wemdmn4


From: Ryan Ratliff [mailto:rratliff at cisco.com]
Sent: Thursday, April 01, 2010 4:09 PM
To: Jason Aarons (US)
Cc: H, Tim; cisco-voip at puck-nether.net
Subject: Re: [cisco-voip] Registering Phones

Most likely the firmware on the phone from manufacturing doesn't support peer firmware sharing.

That said, if it did then it would be enabled by the TFTP config file the phone downloads from CUCM and that happens before the phone tries to upgrade firmware.

-Ryan

On Apr 1, 2010, at 4:01 PM, Jason Aarons (US) wrote:


Does the default load out of the box from manufacturing having peer firmware sharing enabled by default?  O

r do new phone deployments require a TFTP/cnf download that turns on peer firmware sharing?

From: cisco-voip-bounces at puck.nether.net<mailto:cisco-voip-bounces at puck.nether.net> [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Ryan Ratliff
Sent: Thursday, April 01, 2010 2:03 PM
To: H, Tim
Cc: cisco-voip at puck-nether.net<mailto:cisco-voip at puck-nether.net>
Subject: Re: [cisco-voip] Registering Phones

You can specify a load server in CCMAdmin for the phone(s).  They will use DHCP option 150 for TFTP but when pulling firmware files will try to get it from that server.

That and peer-firmware sharing should help out a lot.

-Ryan

On Apr 1, 2010, at 1:34 PM, H, Tim wrote:



Is there a way to tell the status of a phone from a remote site?  I have phones setup to DHCP and auto-register to the CUCM.  The problem is, they'll be downloading different firmware and probably take quite a while to load up.  I need to know if the phones actually are downloading the firmware or not.  Any idea on how to tell this?

Is there a way to put the firmware config on the local VGW to pull from it?

Thanks,

Tim

_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net<mailto:cisco-voip at puck.nether.net>
https://puck.nether.net/mailman/listinfo/cisco-voip


________________________________


Disclaimer: This e-mail communication and any attachments may contain confidential and privileged information and is for use by the designated addressee(s) named above only. If you are not the intended addressee, you are hereby notified that you have received this communication in error and that any use or reproduction of this email or its contents is strictly prohibited and may be unlawful. If you have received this communication in error, please notify us immediately by replying to this message and deleting it from your computer. Thank you.




-----------------------------------------
Disclaimer:

This e-mail communication and any attachments may contain
confidential and privileged information and is for use by the
designated addressee(s) named above only.  If you are not the
intended addressee, you are hereby notified that you have received
this communication in error and that any use or reproduction of
this email or its contents is strictly prohibited and may be
unlawful.  If you have received this communication in error, please
notify us immediately by replying to this message and deleting it
from your computer. Thank you.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20100401/babc41b1/attachment.html>