[cisco-voip] Call Manager Callback Configuration

[Jim Reed]

Is the below a valid configuration for Call Manager Fallback.  They have at least two (2) main numbers ringing into this router so I need to direct calls to specific phones based on the called number.  Or is there a better way to do it.

call-manager-fallback
 secondary-dialtone 9
 max-conferences 8 gain -6
 transfer-system full-consult
 ip source-address 10.91.0.100 port 2000
 max-ephones 25
 max-dn 100 dual-line
 default-destination 15001
 access-code fxo 9
 access-code pri 9 direct-inward-dial
 huntstop channel
 no huntstop
 alias 1 2835500 to 15521
 alias 2 2835500 to 15513 preference 1
 alias 3 2835500 to 15520 preference 2
 alias 4 2835500 to 15511 preference 3
 alias 5 2835500 to 15522 preference 4
 alias 6 2835500 to 15523 preference 5
 alias 7 2835500 to 15514 preference 6
 alias 8 2835500 to 15515 preference 7
 alias 9 2835500 to 15516 preference 8 huntstop
 alias 10 8822111 to 15001
 alias 11 8822111 to 15002
 alias 12 8822111 to 15003 preference 1
 alias 13 8822111 to 15004 preference 2
 alias 14 8822111 to 15005 preference 3
 alias 15 8822111 to 15006 preference 4
 alias 16 8822111 to 15007 preference 5
 alias 17 8822111 to 15008 preference 6
 alias 18 8822111 to 15009 preference 7
 alias 19 8822111 to 15010 preference 8 huntstop

Thank You...
--
Jim Reed
Manager of Technical Services
aka Titan of Technology
aka Technology Wrangler
Swift Communications, Inc.
970-243-2200 Ext. 12301
775-772-7666 (Cell)

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20100401/4ec8fa6b/attachment.html>