[cisco-voip] CUCM 6.x MIGRATION to 7.x

[Joe Martini (joemar2)]

This is correct:

"We have to upgrade the CUCM 6.0.1 to at least 6.1.3 then to 7.1.1. Then take the DRS and push the DRS to the new installed CUCM MCS server."

Joe

-----Original Message-----
From: cisco-voip-bounces at puck.nether.net [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Ed Leatherman
Sent: Monday, April 05, 2010 8:38 AM
To: study group
Cc: cisco-voip at puck.nether.net
Subject: Re: [cisco-voip] CUCM 6.x MIGRATION to 7.x

I believe to use DRS you have to be restoring to the same version that the backup was taken from.
You will probably need to do your upgrade first on the old hardware to 7.X, take the backup, and then restore it onto the new hardware. You might want to think about pushing to a later version of 7 as well.

On Mon, Apr 5, 2010 at 6:32 AM, study group <studybean at gmail.com> wrote:
>  We are going to migrate the CUCM from 6.0.1 to 7.1.1. The new CUCM 
> 7.X will be installed on a new MCS hardware.
> The problem is how to migrate the data of the previous CUCM 6.x
>
> I know we have to use DRS to take the backup of the CUCM 6 to do this. 
> But will the CUCM 7.x will accept the DRS of the CUCM 6.0.1.
> Or
>
> We have to upgrade the CUCM 6.0.1 to atleast 6.1.3 then to 7.1.1. Then 
> take the DRS and push the DRS to the new installed CUCM MCS server.
>
>
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>



--
Ed Leatherman

_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip