[cisco-voip] Cisco 9951

[Ryan Ratliff]

Not at all.

Did you also install the device pack that gets you support for these phones?

I believe the latest SU on cisco.com also will add support for them as well.

-Ryan

On Apr 6, 2010, at 10:56 AM, Jamie Weatherhead wrote:


Afternoon all,
 
I am testing a Cisco 9951 end point.
 
I downloaded the latest firmware and successfully uploaded it to my publisher. I restarted the TFTP service, but cannot see the relevant load information under Device Defaults.
 
I am using the required version of CUCM which is 7.1(3). However, this is only a test publisher which is running in VMWare.
 
Is it possible that I can’t test phones of this type on an unlicensed (test) publisher?
 
Thanks
Jamie
 
 

Consider the environment - Think before you print

The contents of this email are confidential to the intended recipient and may not be disclosed. Although it is believed that this email and any attachments are virus free, it is the responsibility of the recipient to confirm this. 

You are advised that urgent, time-sensitive communications should not be sent by email. We hereby give you notice that a delivery receipt does not constitute acknowledgement or receipt by the intended recipient(s).

Details of Charles Stanley group companies and their regulators (where applicable), can be found at this URL http://www.charles-stanley.co.uk/contact-us/disclosure/


_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20100406/c607d6e2/attachment.html>