[cisco-voip] Cisco 9951

[Ed Leatherman]

Jamie,

did you run the firmware file as a software upgrade (.cop file I
think)? It sounds like you may have just uploaded the files to TFTP..
need to actually run it as a software upgrade.

On Tue, Apr 6, 2010 at 10:56 AM, Jamie Weatherhead
<Jamie.Weatherhead at charles-stanley.co.uk> wrote:
> Afternoon all,
>
>
>
> I am testing a Cisco 9951 end point.
>
>
>
> I downloaded the latest firmware and successfully uploaded it to my
> publisher. I restarted the TFTP service, but cannot see the relevant load
> information under Device Defaults.
>
>
>
> I am using the required version of CUCM which is 7.1(3). However, this is
> only a test publisher which is running in VMWare.
>
>
>
> Is it possible that I can’t test phones of this type on an unlicensed (test)
> publisher?
>
>
>
> Thanks
>
> Jamie
>
>
>
>
>
> Consider the environment - Think before you print
>
> The contents of this email are confidential to the intended recipient and
> may not be disclosed. Although it is believed that this email and
> any attachments are virus free, it is the responsibility of the recipient to
> confirm this.
>
> You are advised that urgent, time-sensitive communications should not be
> sent by email. We hereby give you notice that a delivery receipt does not
> constitute acknowledgement or receipt by the intended recipient(s).
>
> Details of Charles Stanley group companies and their regulators (where
> applicable), can be found at this URL
> http://www.charles-stanley.co.uk/contact-us/disclosure/
>
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>



-- 
Ed Leatherman