[cisco-voip] Cisco 9951

[Jamie Weatherhead]

Afternoon all,

 

I am testing a Cisco 9951 end point. 

 

I downloaded the latest firmware and successfully uploaded it to my
publisher. I restarted the TFTP service, but cannot see the relevant
load information under Device Defaults.

 

I am using the required version of CUCM which is 7.1(3). However, this
is only a test publisher which is running in VMWare.

 

Is it possible that I can't test phones of this type on an unlicensed
(test) publisher?

 

Thanks

Jamie

 

 


Consider the environment - Think before you print

The contents of this email are confidential to the intended recipient and may not be disclosed. Although it is believed that this email and any attachments are virus free, it is the responsibility of the recipient to confirm this. 

You are advised that urgent, time-sensitive communications should not be sent by email. We hereby give you notice that a delivery receipt does not constitute acknowledgement or receipt by the intended recipient(s).

Details of Charles Stanley group companies and their regulators (where applicable), can be found at this URL http://www.charles-stanley.co.uk/contact-us/disclosure/

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20100406/adfd7e38/attachment.html>