[cisco-voip] block outbound caller id NAME

[Ryan Ratliff]

You should be able to just remove the option to send Display IE for outbound calls on the gateway in CCMAdmin.

-Ryan

On Apr 7, 2010, at 6:38 PM, Tim Frazee wrote:

I understand that. This is in Canada.

Nonetheless, I need to block it. Anyone know how to do that? 

On Wed, Apr 7, 2010 at 4:33 PM, Mark Rudholm <mark at rudholm.com> wrote:
In the US, the Calling Name is normally looked up at the terminating
switch, not sent from the originating switch.
Tim Frazee wrote:
Group,

Does anyone know how to block outbound caller ID name from getting to the telco when using DMS-100 as my isdn switch-type?

I really don't want to go thru the alerting and display parameters in the system, but would like an option instead of asking the telco to block the name from passing.

Thank you much.


------------------------------------------------------------------------


_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip

_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip

_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20100408/6105c93b/attachment.html>