[cisco-voip] block outbound caller id NAME

[Tim Frazee]

forgot all about that setting...... Thanks Ryan

On Thu, Apr 8, 2010 at 8:15 AM, Ryan Ratliff <rratliff at cisco.com> wrote:

> You should be able to just remove the option to send Display IE for
> outbound calls on the gateway in CCMAdmin.
>
> -Ryan
>
> On Apr 7, 2010, at 6:38 PM, Tim Frazee wrote:
>
> I understand that. This is in Canada.
>
> Nonetheless, I need to block it. Anyone know how to do that?
>
> On Wed, Apr 7, 2010 at 4:33 PM, Mark Rudholm <mark at rudholm.com> wrote:
>
>> In the US, the Calling Name is normally looked up at the terminating
>> switch, not sent from the originating switch.
>> Tim Frazee wrote:
>>
>>> Group,
>>>
>>> Does anyone know how to block outbound caller ID name from getting to the
>>> telco when using DMS-100 as my isdn switch-type?
>>>
>>> I really don't want to go thru the alerting and display parameters in the
>>> system, but would like an option instead of asking the telco to block the
>>> name from passing.
>>>
>>> Thank you much.
>>>
>>>
>>> ------------------------------------------------------------------------
>>>
>>>
>>> _______________________________________________
>>> cisco-voip mailing list
>>> cisco-voip at puck.nether.net
>>> https://puck.nether.net/mailman/listinfo/cisco-voip
>>>
>>
>> _______________________________________________
>> cisco-voip mailing list
>> cisco-voip at puck.nether.net
>> https://puck.nether.net/mailman/listinfo/cisco-voip
>>
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20100408/601d0675/attachment.html>