[cisco-voip] Get the Media Stream on a VG

[Justin Steinberg]

not sure how you would initiate the conference.   Perhaps you could do
something with a TCL script but it would depend on the capabilities of the
SIP recording solution.

The easiest thing I can think of would be to use a passive T1 recording
solution and tap either the PSTN T1 or the central system T1.

On Fri, Apr 9, 2010 at 6:49 AM, Beck, Philipp <pbeck at ins.hsr.ch> wrote:

> Hi all,
> I have a request from a costumer I just do not know if it can be done. From
> my point of view it is not possible but probably you guys know a possible
> solution.
> The customer has a strange system which reports its state to the central
> system by using DTMF. The central system is now on a ISDN PRI Interface of
> a
> Voice GW. The PSTN Network is also via PRI connected. The IP Telephony
> world
> is connected with SIP. So the costumer wants know to get the media, or DTMF
> recorded. We already have an recording solution in place and we could
> connect to that over SIP. He would really like that because every recording
> will be in one place.
> My assumption was that I would use a 28xx or 38xx HW and automatically
> initiate a conference if someone dials the specific number. Then I could ad
> the Business solution on one side and the SIP Endpoint on the other side.
> Is
> this possible?
> Are there any other solutions to get the media Stream if the VG routes from
> one PRI to another PRI ?
>
> Thanks in advance for your response and ideas! Any idea to solve this
> problem is welcome!
>
> Regards.
> Philipp
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20100409/df393f53/attachment.html>