[cisco-voip] Cisco ATA

[Dew Swen]

Just regular phone cable. 2 wires.

-
Dew Swen


On Fri, Apr 9, 2010 at 5:25 PM, Martin Bufton
<m.bufton at spectra-group.co.uk>wrote:

>  What Cable should I run from a Cisco ATA to a UK phone.
>
>
>
> The ATA registers and I can dial it but the analogue phone doesn’t ring,
> nor does it get dial tone.
>
>
>
> It is plugged into port 1
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20100411/f6390b76/attachment.html>