[cisco-voip] Cisco ATA

[Martin Bufton]

What pin outs?

 

 

Martin Bufton BSc (Hons), CCNA - Systems Engineer

 

Email: m.bufton at spectra-group.co.uk
<mailto:m.bufton at spectra-group.co.uk> 

Tel: 01531 651221

Mobile: 07515 285505

 

Spectra Group (UK) Limited

 

Telephone: 0845 2600 444   Web: www.spectra-group.co.uk
<http://www.spectra-group.co.uk/>  Fax: 0845 2600 445

 

Company Registration Number: 4570376

 

From: Dew Swen [mailto:dew.swen at gmail.com] 
Sent: 11 April 2010 14:21
To: Martin Bufton
Cc: cisco-voip voyp list
Subject: Re: [cisco-voip] Cisco ATA

 

Just regular phone cable. 2 wires.

-
Dew Swen



On Fri, Apr 9, 2010 at 5:25 PM, Martin Bufton
<m.bufton at spectra-group.co.uk> wrote:

What Cable should I run from a Cisco ATA to a UK phone.

 

The ATA registers and I can dial it but the analogue phone doesn't ring,
nor does it get dial tone.

 

It is plugged into port 1


_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20100412/01654ae6/attachment.html>