[cisco-voip] FXS or ATA for paging

[Ben Story]

It depends on the paging system.  If it's a something like a Valcom that has
an FXO port on it, an FXS on the router will do the trick.  Some systems
though need and E&M port.

On Mon, Apr 12, 2010 at 7:27 AM, David Zhars <dzhars at gmail.com> wrote:

> I have a building with a 2801 and a 4 port FXS card in it.  Overhead
> speakers throughout the building.
> I'm trying to figure out, what's the easiest way to do a paging scenario
> with this?  Is there anyway to use the FXS card, or just buy an external ATA
> hooked into the 3560?  Also don't I need another box (I think the ATA goes
> off into some sort of maybe amplifier so something to feed the speakers?)
>
> Would appreciate any insight.
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>


-- 
--
Ben Story
CCSP, CCNA, CCNA Wireless, CCDA
ben.story at gmail.com

"You cannot escape the responsibility of tomorrow by evading it today. --
Abraham Lincoln
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20100412/6c587693/attachment.html>