[cisco-voip] FXS or ATA for paging

[lelio at uoguelph.ca]

Take a look at the Bogen TAM-B. It will allow you to connect an FXS  
port and take care of the disconnect for you.

Lelio Fulgenzi, Senior Analyst
Computing & Communications
University of Guelph
519-824-4120 x56354

...sent from my iPod - please pardon my fat fingers ;)

[XKJ2000]

On 2010-04-12, at 8:31 AM, Ben Story <ben.story at gmail.com> wrote:

> It depends on the paging system.  If it's a something like a Valcom  
> that has an FXO port on it, an FXS on the router will do the trick.   
> Some systems though need and E&M port.
>
> On Mon, Apr 12, 2010 at 7:27 AM, David Zhars <dzhars at gmail.com> wrote:
> I have a building with a 2801 and a 4 port FXS card in it.  Overhead  
> speakers throughout the building.
> I'm trying to figure out, what's the easiest way to do a paging  
> scenario with this?  Is there anyway to use the FXS card, or just  
> buy an external ATA hooked into the 3560?  Also don't I need another  
> box (I think the ATA goes off into some sort of maybe amplifier so  
> something to feed the speakers?)
>
> Would appreciate any insight.
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>
>
>
> -- 
> --
> Ben Story
> CCSP, CCNA, CCNA Wireless, CCDA
> ben.story at gmail.com
>
> "You cannot escape the responsibility of tomorrow by evading it  
> today. -- Abraham Lincoln
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20100412/4c844fe6/attachment.html>