[cisco-voip] Gigabit Ethernet cross-over adapter?

[Ben Story]

When someone has configured a port to not be auto or when you have a brain
dead piece of equipment that doesn't follow the spec.

On Mon, Apr 12, 2010 at 11:00 AM, Robert Kulagowski <rkulagow at gmail.com>wrote:

> While looking for a T1 crossover adapter, I ran into this:
>
>
> http://www.amazon.com/Cables-Unlimited-TST-LOOP-007-Smartronix-Superlooper/dp/B000G82K86/ref=pd_sim_e_8
>
> If GigE is auto-mdix, when would you use this sort of device?  Is it a
> "belt-and-suspenders" kind of backup plan?
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>



-- 
--
Ben Story
CCSP, CCNA, CCNA Wireless, CCDA
ben.story at gmail.com

"You cannot escape the responsibility of tomorrow by evading it today. --
Abraham Lincoln
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20100412/fc74d738/attachment.html>