[cisco-voip] Gigabit Ethernet cross-over adapter?

[Matthew Ballard]

I'm quite certain that it can be used for 10, 100, and 1000, and they're
just advertising the top speed that it can handle.


Matthew

 

 

From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Ben Story
Sent: Monday, April 12, 2010 9:09 AM
To: cisco-voip
Subject: Re: [cisco-voip] Gigabit Ethernet cross-over adapter?

 

When someone has configured a port to not be auto or when you have a
brain dead piece of equipment that doesn't follow the spec.

On Mon, Apr 12, 2010 at 11:00 AM, Robert Kulagowski <rkulagow at gmail.com>
wrote:

While looking for a T1 crossover adapter, I ran into this:

http://www.amazon.com/Cables-Unlimited-TST-LOOP-007-Smartronix-Superloop
er/dp/B000G82K86/ref=pd_sim_e_8

If GigE is auto-mdix, when would you use this sort of device?  Is it a
"belt-and-suspenders" kind of backup plan?
_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip




-- 
--
Ben Story 
CCSP, CCNA, CCNA Wireless, CCDA
ben.story at gmail.com

"You cannot escape the responsibility of tomorrow by evading it today.
-- Abraham Lincoln

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20100412/cade305b/attachment.html>