[cisco-voip] Auto Attendent

[Robben, John]

Go to Application, Cisco Unified Callmanager Serviceability

Go to Tools, Control Center

Select a server (doesn't matter which one you do first - you have to do
all)

Select Cisco Telephony Call Dispatcher 

Stop and then Start the Service

Do the same for second server


________________________________

From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Ali El
Moussaoui
Sent: Tuesday, April 13, 2010 2:57 AM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] Auto Attendent


Hello,
 
I arrived to office this morning and got a call from the operator that
the "Line Status" in auto atendent are giving "?" as unknown. I did
restart the CTI Manager service and the TCD service but still the same.
i even did a reset for the Pilot with no success. We are using call
manager 4.2. Any idea how to troubleshoot this issue?
 
Regards,
Ali
-----------------------------------------
CONFIDENTIALITY NOTICE

This message and any attachments are from the NAIC and are intended
only for the addressee. Information contained herein is
confidential, and may be privileged or exempt from disclosure
pursuant to applicable federal or state law.  This message is not
intended as a waiver of the confidential, privileged or exempted
status of the information transmitted.  Unauthorized forwarding,
printing, copying, distribution or use of such information is
strictly prohibited and may be unlawful. If you are not the
addressee, please promptly delete this message and notify the
sender of the delivery error by e-mail or by calling the NAIC Help
Desk at (816)783-8500.