[cisco-voip] CUCM RAM requirement

[Mike Thompson]

Nope, install will look for the RAM.  I think you're out of luck.

 

 

 

From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Kevin Damisch
Sent: Monday, April 12, 2010 1:04 PM
To: cisco-voip
Subject: [cisco-voip] CUCM RAM requirement

 

Doing an inplace upgrade from CUCM 5.x to 7.x, but the servers only have 1GB
of RAM and we plan on putting in 2GB of RAM.  I was hoping to upgrade the
publisher, then power it down, install the extra 1GB of RAM, then power it
back up on the new version.  I'm assuming it will fail though to run the
upgrade since it doesn't have 2GB.  So, I would need to power off the
servers, install the RAM, power them back up, run the upgrade, reboot again.
Any thoughts on how to upgrade this without having to reboot twice?

 

  _____  

This communication (including any attachments) is intended only for the use
of the individual or entity to which it is addressed, and may contain
information that is privileged, confidential and exempt from disclosure
under applicable law. If you are not the intended recipient, any
dissemination, distribution or copying of this communication is strictly
prohibited. If you have received this communication in error, please notify
Vital Support Systems at 515 334 5700 and delete or destroy all copies and
the original document.

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20100414/3209a165/attachment.html>