[cisco-voip] 3640 and MFR

[Scott Voll]

it's been a long time..... but if memory serves... I think you need IP Plus.

Scott

On Wed, Apr 14, 2010 at 11:45 AM, Jim Reed <jreed at swiftnews.com> wrote:

> While this does not necessarily involve VoIP -- although VoIP will run over
> these circuits -- does anyone know what the minimum IOS file is that
> supports MFR (multilink frame relay)?  What I'm trying to say is does just
> the basic IP image support MFR -- doesn't seem to.  Or does it require IP
> Plus.  Or Enterprise.  Or Enterprise Plus.  Etc.  Etc.  Etc.  The software
> advisor tool on Cisco's website doesn't even list the 36xx series routers
> any more.  Although it does list the 26xx series routers.  Any insight
> would
> be greatly appreciated -- as always.
> --
> Jim Reed
> Manager of Technical Services
> aka Titan of Technology
> aka Technology Wrangler
> Swift Communications, Inc.
> 970-243-2200 Ext. 12301
> 775-772-7666 (Cell)
>
>
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20100414/551812ca/attachment.html>