[cisco-voip] Mobile Voice Access - Caller ID

[Bill Talley]

Sorry, I've presumed you're not prefixing 650 to the calling party number on
your h323 gateway using voice translation rules.   If you are, you'll need
need to create an additional rule on the gateway to ensure calling number is
unchanged if it's already 10-digits.

On Wed, Apr 14, 2010 at 4:06 PM, Bill Talley <btalley at gmail.com> wrote:

> Is the calling party transform mask on your route pattern or route list set
> to 650XXXX, or set to prefix 650?    It looks like that's causing the system
> to combine 650 with last four digits of your cell phone number.
>
> Someone else will hopefully correct me if I'm wrong, but I believe you'll
> most likely need to use calling party transformations to expand the number
> to ten digits.   You'll want to create a new partition and a new CSS
> containing only that partition. Create a new calling party transformation
> pattern that matches the caller id of the cell phone, maybe
> [2-9]XX[2-9]XXXXXX and assign it to the partition you just created.  Set the
> calling party transform mask to ten X's.   Once that's done, go to the
> remote destination profile and uncheck Use Device Pool Calling Party
> Transformation CSS and set the Calling Party Transformation CSS to the one
> you just created.  Save changes and test.
>
> That's how I'm doing it anyway, but I haven't spent a lot time researching
> proper usage of calling party transformations.
>
>
> It sounds like you're using a external calling party mask of 650XXXX, or
> perhaps prefixing 650 to the calling party mask on the route pattern or
> route list.
>
> On Wed, Apr 14, 2010 at 3:09 PM, Monica Hardy <Monica.Hardy at openwave.com>wrote:
>
>>  Hello everyone,
>>
>> I setup the Mobile Voice Access using the hairpinning method.  Everything
>> is working except for complete caller-id.
>>
>>
>>
>> For example if I call out from my cell phone using my remote destination
>> profile and mobile voice access my
>>
>> caller-id will be shown as 6505597 instead of 6504805597.  I have tried a
>> bunch of settings, any idea where I should
>>
>> be looking at?  I was under the impress that the call would be coming back
>> out of my PSTN gw, so I don’t see why it
>>
>> wouldn’t work like it normally works when just calling out directly from
>> my desk phone?
>>
>>
>>
>> Any ideas?
>>
>>
>>
>> CCM 7.02
>>
>> H323 GW 12.4.24.T3
>>
>>
>>
>> -Monica
>>
>>
>>
>> --------------------------------------------
>>
>>
>>
>> [image: cid:image001.gif at 01CA0FA5.8F211190]
>>
>>
>>
>> Monica P. Hardy
>>
>> Openwave
>>
>> Sr. Network Engineer
>>
>> Phone: 650-480-5597
>>
>> email:  monica.hardy at openwave.com
>>
>>
>>
>> _______________________________________________
>> cisco-voip mailing list
>> cisco-voip at puck.nether.net
>> https://puck.nether.net/mailman/listinfo/cisco-voip
>>
>>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20100414/09c650c8/attachment.html>